Versions Compared

Old Version 5

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-5700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kit
    KitID917
    KitDescCoin and Card
    step
    componentMounting

  • Place the C-6700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kit
    KitID815
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Insert the C-0928 Mounting Bracket into the coin vault. Secure in place using the C-1059 Kep Nuts.

    3. Apply the C-5027 Label to the FasCard Reader.

    Cci readerinstall kit
    KitID584
    KitDescCoin and Card
    Cci readerinstall kit
    KitID871
    KitDescCard Only

    1. Remove existing coin box and coin drop.

    2. Attach C-5414 F2 Mounting Bracket to the C-6928 Vault Mounting Bracket using the C-5420 Screws.

    3. Install the C-6928 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts.

    Cci readerinstall kit
    KitID744

    1. Remove existing coin box and coin drop.

    2. Insert the C-0928 Mounting Bracket into the coin vault. Secure in place using the C-1059 Kep Nuts.

    ...

    step
    componentPower

    Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

  • Connect the C-5210 Power Adapter Harness to the installed spade taps.

  • Connect the C-5210 Power Adapter Harness to the C-5602 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

  • Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID595

    ...

    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID689
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5357 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID716
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID956
    KitDescCoin Drop: Dual Coin Drops

    1. Disconnect the Coin Drops from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Sensor on the first coin drop.

      1. Repeat using the second C-6357 Coin Sense Harness and the secondary Coin Sensor.

    Connect Machine Interface Harness

    Connect the C-0126R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID627
    KitDescPulse
    step
    componentStart

    cci-readerinstall-kit
    KitID655
    KitDescPulse

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

    Cci readerinstall kit
    KitID814
    KitDescSerial

    1. Connect the C-0126-MLV Machine Start Harness to the RS232 connector on the Machine Control Assembly.

    2. Connect the C-5359 Machine Start Harness to the Input connector on the Machine Control Assembly.

    Connect and Mount Reader

    ...

    Machine Configuration

    ...

    step
    componentReader

    Cci readerinstall footer