Versions Compared

Old Version 5

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5210 Power Adapter Harness to the incoming power wires.

  1. 120vac: Tap and connect the blue wire to L1 and the brown wire to N.

  2. 240vac: Tap and connect the brown and blue wires to connectors L1 and L2 wires.

  3. Tap and connect the green wire to the ground wire.

  • Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kitstep
    KitIDcomponent595

    ...

    Mounting

    Cci readerinstall step
    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-6250 Coin Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitIDcomponent700KitDescCoin Drop: Factory
    Sense

    ...

    Connect the C-5272 Machine Start Harness to the Coin 1 connector in the metercase.
    cci-readerinstall-kitstep
    KitID642
    KitDescPulse
    componentStart

    Cci readerinstall step
    componentReader

    ...