Versions Compared

Old Version 5

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall step
componentMounting

Connect Power

Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5213 Power Adapter Harness to the power distribution terminal block inside the machine.

  1. Connect the black wire to a L1 tab.

  2. Connect the white wire to a L2 tab.

  3. Connect the Green/Yellow wire to the ground tab.

  • Connect the opposite end of the C-5213 Power Adapter Harness to the C-5602R1 Power Converter.

  • Connect the C-5500-115 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kitstep
    KitID617

    Connect Coin Sense Harness

    componentPower

    cci-readerinstall-kit
    KitID707
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

    ...

    step
    componentCoin Sense

    Connect the C-5257 Machine Start Harness to the P2 connector on the Machine Control Assembly.
    cci-readerinstall-kitstep
    KitID634
    KitDescPulse
    componentStart

    Cci readerinstall step
    componentReader

    ...