| cci-readerinstall-kit |
|---|
| KitID | 841 |
|---|
| KitDesc | Coin and Card |
|---|
|
Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify included harnesses will reach desired location without encountering interference from internal machine components.
Refer to FasCard Mounting Guide for further instructions.
...
| cci-readerinstall-kit |
|---|
|
Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
Connect the C-5500-60 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
...
| cci-readerinstall-kit |
|---|
| KitID | 711 |
|---|
| KitDesc | Coin Drop: Phase 5 |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-6343 Coin Sense Harness to the harness connected to the Coin Drop.| step |
|---|
|
|
...