| cci-readerinstall-kit |
|---|
| KitID | 916 |
|---|
| KitDesc | Card Only - Coin Model w/ Standard Metercase |
|---|
|
Remove existing coin box and coin drop.
Attach C-5760-A Alliance Adapter Bracket to C-6760 Metercase Bracket.
Attach the C-5414 Mounting Bracket to C-6760 Metercase Bracket using the (2)C-5420 10-32 x 1/4 Pan Screws.Mount C-6760 Metercase Bracket into the front of the metercase, inserting the two studs through the coin slot openings.
Secure to the metercase using (2) C-1059 Kep Nuts and (2) C-1070-W Washers.
| cci-readerinstall-kit |
|---|
| KitID | 837 |
|---|
| KitDesc | Titanium Control - 24VAC Transformer |
|---|
|
Connect the 2-pin connector from the C-6207 F2, ACA Power Harness to the 24v transformer behind the front control panel. The remaining end (3-pin molex) connects directly to the rear of the F2 FasCard Reader.
|
| Cci readerinstall kit |
|---|
| KitID | 663 |
|---|
| KitDesc | Tap 120v Machine Power |
|---|
|
Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5336 Power Adapter Harness to the power distribution panel inside the machine.120vac: Connect the blue wire to L1 and the brown wire to N.
240vac: Connect the blue wire to L1 and the brown wire to L2.
Secure the green wire to the ground screw.
Connect the opposite end of the C-5336 Power Adapter Harness to the C-5602R1 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.
...
...
...