Versions Compared

Old Version 6

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-5700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to FasCard Mounting Guide for further instructions.
    cci-readerinstall-kit
    KitID616
    KitDescCoin and Card
    step
    componentMounting

    Cci readerinstall step
    componentPower

    Connect Coin Sense Harness

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-5258 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID679
    KitDescFactory - Optical Coin Drop
    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID707
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-0127-MLV Machine Start Harness to the P9 - Serial connection on the Machine Control Assembly.
    Cci readerinstall kit
    KitID578
    KitDescSerial
    step
    componentStart

    Cci readerinstall step
    componentReader

    ...