Versions Compared

Old Version 6

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

Connect Coin Sense Harness

cci-readerinstall-kitstep
KitIDcomponent923
KitDescCoin Drop - Factory Optical

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6332 Coin Sense Harness to the harness connected to the Coin Drop.

    1. Connect the Red connector to the Coin Acceptor connection, where the coin drop was previously connected, on the Machine Control Assembly.

Mounting

Cci readerinstall step
componentPower

cci-readerinstall-kit
KitID885
KitDescCombination Harness - Coin Sense Connections

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the white, male, 8-pin connector from the C-6330 Combination Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

step
componentCoin Sense

  • Connect the C-0114-MLV Machine Start Harness to the middle X1 port on the serial communication board.

    • The RJ11 connector on the end of the C-0114-MLV Machine Start Harness will fit into the middle X1 RJ45 port even though the RJ11 connectoris smaller in size.CCIDOCCOM BoardsfalseConnect the red, female, 8-pin connector of the C-6330 Combination Harness to the Coin Acceptor connector on the Machine Control Assembly.
    cci-readerinstall-kit
    KitID608
    KitDescSerial
    Cci readerinstall kit
    KitID885
    KitDescPulse - Combination Harness - Machine Interface Connections
    step
    componentStart

    Cci readerinstall step
    componentReader

    ...