Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Remove existing coin box and coin drop.

  • Attach the C-5414 F2 Mounting Bracket to the C-6923 Metercase Bracket using (2) C-5420 10-32 x 1/4 Pan Screws.

  • Run any card reader harnesses through the coin slot openings and the circular hole in the C-6923Metercase Bracket.
  • Install the C-6923 Metercase Bracket into the front of the metercase and secure using the C-0923-ROD Metercase Mounting Rod from inside the metercase.

  • cci-readerinstall-kit
    KitID965
    KitDescCard Only - Coin Model

    Connect Power

    step
    componentMounting

    cci-readerinstall-kitstep
    KitID595
    KitDescTap 120/240v Power
    1. Use the C-5101 Spade Taps on the incoming power.

      1. Tap the L1 wire.

      2. Tap the N/L2 wire.

      3. Tap the Ground wire.

    2. Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:

      1. Connect the blue wire to the L1 wire.

      2. Connect the brown wire to the N/L2 wire.

      3. Connect the green/yellow wire to the Ground wire.

    3. Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.

    4. Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.

    ...

    componentPower

    Cci readerinstall step
    componentCoin Sense

    cci-readerinstall-kitstep
    KitIDcomponent700
    KitDescCoin Drop - Factory Optical
    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Start

    cci-readerinstall-kit
    KitID642
    KitDescPulse - Coin Drop (Coin Model)
    1. Connect the C-5272 Machine Start Harness to the machine coin harness originally connected to the coin drop.

    ...

    step
    componentReader

    Cci readerinstall footer