Install Mounting Hardware
| Cci readerinstall kit |
|---|
| KitID | 904 |
|---|
| KitDesc | Card Only - Card Model |
|---|
|
Remove the (4) security torx retaining screws on the front of the machine. Remove the soap tray by pulling it out and pressing on the retaining tab in the rear of the tray. Locate and remove the (2) security torx screws inside the soap tray opening. Remove the final (2) torx screws to open the top cover. Locate a spot on top of the machine to mount the reader. Verify included harnesses will reach desired location without encountering interference from internal machine components. Mark the location using C-5700-TEMP Drill Template. Refer to F1 Reader Mounting Guide for instructions on drilling mounting holes and mounting the reader.
|
...
...
Locate and remove the (2) security torx screws inside the soap tray opening.
Remove the final (2) torx screws to open the top cover.
...
Locate a spot on top of the machine to mount the reader. Verify included harnesses will reach desired location without encountering interference from internal machine components. Mark the location using C-6700-TEMP Drill Template.
...
Connect Power
...
...
Use the C-5101 Spade Taps to tap the black (L1) and white (Neutral) wires.
Attach the spade ends of the C-5336 Power Adapter Harness to the taps. Blue to black, and Brown to White.
Attach the Green ground wire from the C-5336 Power Adapter Harness to a nearby chassis ground screw.
...
Connect Machine Interface Harness
| Cci readerinstall kit |
|---|
|
Connect the C-5364 Machine Start Harness to the AA3 connector on the Machine Control Assembly.
|
Connect and Mount Reader
Machine Configuration
...
Removing the Front Panel
| Include Page |
|---|
| _Whirlpool CHW9*** Remove Front Panel |
|---|
| _Whirlpool CHW9*** Remove Front Panel |
|---|
|
Machine Configuration
| Insert excerpt |
|---|
| _Machine Configuration |
|---|
| _Machine Configuration |
|---|
| name | MayTag Gen2 Serial |
|---|
| templateData | [] |
|---|
| page | _Machine Configuration |
|---|
| addpanel | falsenopanel | true |
|---|
|