Versions Compared

Version Old Version 6 New Version Current
Changes made by

Chris Kite

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Remove existing coin box and coin drop.

  • Attach C-5760-A Alliance Adapter Bracket to C-6760 Metercase Bracket.

    • Attach the C-5414 Mounting Bracket to C-6760 Metercase Bracket using the (2)C-5420 10-32 x 1/4 Pan Screws.

  • Mount C-6760 Metercase Bracket into the front of the metercase, inserting the two studs through the coin slot openings.

    1. Secure to the metercase using (2) C-1059 Kep Nuts and (2) C-1070-W Washers.

    • cci-readerinstall-kit
    KitID916
    KitDescCard Only - Coin Model w/ Standard Metercase

    Connect Power

    step
    componentMounting

    cci-readerinstall-kitstep
    KitID581
    KitDescACA Control - 12VDC Accessory Power

    1. Connect the C-6204-40 12VDC Power Harness to the H10 Connection on the Machine Control Assembly.

      1. Connect the green wire to a chassis ground.

    2. The remaining end (3-pin molex) connects directly to the rear of the F2 Reader.

    Connect Coin Sense Harness

    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID700
    KitDescCoin Drop - Factory Optical
    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID704
    KitDescCoin Slide - Factory Switch

    1. Disconnect the harness from micro switch.

    2. Connect both ends of C-6253 Coin Sense Harness to the micro switch.

    Connect Machine Interface Harness

    Connect the C-5240 Machine Start Harness to the H3 connection on the Machine Control Assembly.
    Cci readerinstall kit
    KitID582
    KitDescSerial / Pulse - ACA/Titanium Control
    step
    componentStart

    cci-readerinstall-kit
    KitID636
    KitDescPulse - Hybrid Coin Slide Control

    1. Connect the C-5256 Machine Start Harness to the manufacturer's harness previously connected to the micro switch used by the coin slide.

    ...

    step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameACA Configuration
    PageWithExcerpt_Machine Configuration

    ...