Versions Compared

Version Old Version 6 New Version Current
Changes made by

Chris Kite

CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall step
componentMounting

Connect Power

KitDescTap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5210 Power Adapter Harness to the power distribution panel inside the machine.

  1. 120vac: Connect the blue wire to L1 and the brown wire to N.

  2. 240vac: Connect the blue wire to L1 and the brown wire to L2.

  3. Connect the green wire to ground.

  • Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID595
    step
    componentPower Supply - Tap Machine Power

    Connect Coin Sense Harness

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-5362 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID693
    KitDescFactory Coin Drop
    step
    componentCoin Sense

    cci-readerinstall-kitstep
    KitID721
    KitDescFactory Optical Coin Drop

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6362 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    componentStart

    cci-readerinstall-kit
    KitID590
    KitDescStart Harness

    1. Connect the C-5364 Machine Start Harness to the AA3 connector on the Machine Control Assembly.

    Connect and Mount Reader

    ...

    step
    componentReader

    Machine Configuration

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameMayTag Gen1 MLV+ Pulse
    PageWithExcerpt_Machine Configuration

    ...