Versions Compared

Old Version 7

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall step
componentMounting

Connect Power

  • Tap the incoming AC power wires using the C-5101 Spade Taps.

    1. For 120v models: L1, N, and Ground wires

    • Connect the three wires from the C-5210 Power Adapter Harness to theC-5101 Spade Taps.

    1. Connect the Blue wire to the L1 tap.

    2. Connect the Brown wire to the N tap.

    3. Connect the Green/Yellow wire to the Ground tap.

  • Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connector on the C-5602R1 Power Converter.

  • Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connector on the C-5500 Power Extension Harness.

  • Run the C-5500 Power Extension Harness to the reader mounting location.

    • cci-readerinstall-kitstep
    KitID595

    Connect Coin Sense Harness

    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-5362 Coin Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    693
    KitIDcomponentKitDescCoin Drop - Factory Optical
    Sense

    cci-readerinstall-kit
    KitID721
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6362 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5364 Machine Start Harness to the Debit/AA3 connector on the Machine Control Assembly.

    If needed, use the C-126-MLV-EXT15 Extension Harness to extended the reach of the harness.
    Cci readerinstall kit
    KitID1004
    KitDescPulse - Debit/AA3 Connection
    step
    componentStart

    Cci readerinstall step
    componentReader

    ...