| cci-readerinstall-kit |
|---|
|
Remove existing coin drop.
Install C-0913 Drop Cover where the coin drop was previously mounted. Secure using (4) C-1062 4-40 Keps Nuts.
Place the C-6700-TEMP Drill Template on the desired mounting location.
Verify that included harnesses will reach the desired location without encountering interference from internal machine components.
Refer to Touchscreen Reader Mounting Guide (F2 & F3)Â for further instructions.Optional: Use C-5710 Rubber Grommet to protect harnesses from damage during machine operation if any secondary hole is cut internally to run harnesses to the reader mounting location.
| cci-readerinstall-kit |
|---|
|
Tap power as described in the FasCard Reader Install - Universal Concepts page by connecting the C-5203 Power Adapter Harness to the Terminal Block.Brown and Blue wires are interchangeable and connect to L1 and L2.
Secure Green ground wire beneath Green ground screw.
Connect the opposite end of the C-5203 Power Adapter Harness to the C-5602 Power Converter.
Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.| step |
|---|
|
|
...