Install Mounting Hardware
...
| cci-readerinstall-kit |
|---|
|
Remove existing coin box. Bend the side tabs of the C-0936 Vault Mount Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket. Attach the C-0133 8-32 x 1-1/2" Standoffs to the C-0936 Vault Mount Bracket. Attach reader to the Bracket using C-0141 Screw.
|
| Cci readerinstall kit |
|---|
|
Remove existing coin box and coin drop. Bend the side tabs of the C-6936 Vault Bracket outward and install into the coin vault. The tabs should snap into place securing the bracket. Attach the C-5414 Mounting Bracket to the C-6936 Vault Bracket using C-0144 Screws. Apply C-5035 Label over the coin drop opening.
|
Connect Power
...
...
Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.
...
Connect the C-5500-84 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.
| cci-readerinstall-kit |
|---|
| KitID | 689 |
|---|
| KitDesc | Coin Drop: Factory |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly.
Connect the C-5357 Coin Sense Harness to the harness connected to the Coin Drop.| step |
|---|
|
|
| Cci readerinstall kit |
|---|
| KitID | 690 |
|---|
| KitDesc | Coin Drop: Bare Wires |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly. Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop. Match each of the colored wires from the coin drop to the matching wire on the coin sense harness.
|
| cci-readerinstall-kit |
|---|
| KitID | 716 |
|---|
| KitDesc | Coin Drop: Edge Connector |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.
|
Connect Machine Interface Harness
| Cci readerinstall kit |
|---|
| KitID | 655 |
|---|
| KitDesc | Pulse - Edge Connector |
|---|
|
Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.| step |
|---|
|
|
...