Remove any existing coin drop. Open the control door panel on the machine. Place the C-0930 Mounting Bracket on the inside of the control door panel and over the coin drop opening. Align the C-0930 Mounting Bracket so the pairs of threaded holes are on the sides of the opening. From the outside of the control door panel, insert the card reader through the coin drop opening and the inner cutout of the C-0930 Mounting Bracket. Align the screw holes of the card reader to the lower set of threaded holes on the C-0930 Mounting Bracket and then attach using the (2) C-0141 8-32 x 1-1/2" cap screws, ensuring the card reader is placed to cover the coin drop opening.
|