Install Mounting Hardware
...
| cci-readerinstall-kitstep |
|---|
| KitID | 696 |
|---|
| KitDesc | Coin Drop: Imonex |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly. Connect the C-5382 Coin Sense Harness to the harness connected to the Coin Drop.
|
|
|
| cci-readerinstall-kit |
|---|
| KitID | 700 |
|---|
| KitDesc | Coin Drop: Factory |
|---|
|
Disconnect the Coin Drop from the Machine Control Assembly. Connect the C-6250 Coin Sense Harness to the harness connected to the Coin Drop.
|
Connect Machine Interface Harness
| cci-readerinstall-kitstep |
|---|
|
Connect the C-5300-NC Machine Start Harness to the Coin 1 connector on the Machine Control Assembly. |
|
| cci-readerinstall-kitstep |
|---|
|
Connect the C-0110-TOP Machine Start Harness to the H3 connector on the Machine Control Assembly.
|
|
|
Connect and Mount Reader
| Multiexcerpt include |
|---|
| SpaceWithExcerpt | CCIDOC |
|---|
| MultiExcerptName | F2 Reader |
|---|
| PageWithExcerpt | _Reader Ports |
|---|
|
...
Feed remaining harness ends through the mounting holes.
...
(Standard Installations - No Stack Add-On Kit) Connect the free end of the Machine Start Harness:
If following steps for a serial, connect the C-0110-TOP Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.
If following steps for a pulse, connect the C-5300-NC Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
...
(F2/F3 - Serial Stack Add-On Installations Only) Connect the black, 10-pin connector from the C-0110-TOP Machine Start Harness to the Unit 1 connection and the C-0110-TOP Machine Start Harness to the Unit 2 connection on the C-6401 or C-6411 Serial Stack Add-On Board.
...
(Coin and Card Installations Only) Connect the free end of the C-6250 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
...
...
...