Versions Compared

Old Version 8

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Install the C-5702 Chase Nipple into the C-5414 F2 Mounting Bracketusing the C-5703 Nut.

  • Feed the remaining harness ends through the open face of the Coin Vault.

  • Spread the C-6936 Vault Mount Bracket wings outward before insertion to lock bracket into place.

  • Feed remaining harness ends through the C-6936 Vault Mount Bracket.

  • Insert the C-6936 Vault Mount Bracket into the Coin Vault.

  • Feed the remaining harness ends through the combined C-5414 F2 Mounting Bracket.

    • Secure the combined C-5414 F2 Mounting Bracketto the C-6939 Vault Mount Bracket with the C-0144 Screws.
    cci-readerinstall-kit
    KitID667
    KitDescCard Only - Small Coin Vault

    Connect Power

    step
    componentMounting

    Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5338 Power Adapter Harness to the power distribution panel inside the machine or tapping as needed.

    1. 240vac- Connect Blue wire to the L1 tab, and the Brown wire to the L2 tab on the terminal block.

    2. Secure the green wire beneath the ground screw.

  • Connect the opposite end of the C-5338 Power Adapter Harness to the C-5602 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kit
    KitID473

    ...

    step
    componentPower

  • Disconnect the factor coin drop harness from the microswitch on the coin drop.

    • Connect the C-5253 Coin Sense Harness to the microswitch on the the coin drop.
    cci-readerinstall-kit
    KitID677
    KitDescCoin Drop: Factory Mechanical Switch
    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID679
    KitDescCoin Drop: Factory Optical Sensor

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5258 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID696
    KitDescCoin Drop: Imonex w/EM Board

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5382 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID704
    KitDescCoin Drop: Factory - Micro Switch

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID707
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID723
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5254 Machine Start Harness to the P2 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID634
    KitDescPulse - Optical Sensor
    step
    componentStart

    cci-readerinstall-kit
    KitID636
    KitDescPulse - Micro Switch

    1. Connect the C-5256 Machine Start Harness to the harness previously connected to the coin switch on the Coin Drop.

    ...

    step
    componentReader

    Machine Configuration

    No special configuration required.

    ...