Versions Compared

Old Version 9

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

Tap power as described in the Fascard Reader Install - Universal Concepts document using the C-5101 Spade Taps provided.

  • Connect the C-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to the C-5602 Power Converter.

  • Connect the C-5500-84 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kitstep
    KitIDcomponent794

    Connect Coin Sense Harness

    Mounting

    Cci readerinstall step
    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-5357 Coin Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kitstep
    KitIDcomponent689KitDescCoin Drop: Factory
    Sense

    Cci readerinstall kit
    KitID690
    KitDescCoin Drop: Bare Wires

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5358 Coin Sense Harness to the harness connected to the Coin Drop.

      1. Match each of the colored wires from the coin drop to the matching wire on the coin sense harness.

    cci-readerinstall-kit
    KitID716
    KitDescCoin Drop: Edge Connector

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID655
    KitDescPulse - Edge Connector
    step
    componentStart

    Cci readerinstall step
    componentReader

    ...