Versions Compared

Old Version 9

changes.mady.by.user Chris Kite

Saved on

compared with

New Version Current

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Connect Power

Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5338 Power Adapter Harness to the power distribution panel inside the machine or tapping as needed.

  1. 240vac- Connect Blue wire to the L1 tab, and the Brown wire to the L2 tab on the terminal block.

  2. Secure the green wire beneath the ground screw.

  • Connect the opposite end of the C-5338 Power Adapter Harness to the C-5602 Power Converter.

  • Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    • cci-readerinstall-kitstep
    KitID473

    Connect Coin Sense Harness

    componentMounting

    cci-readerinstall-kitstep
    KitID677
    KitDescCoin Drop: Factory Mechanical Switch

    1. Disconnect the factor coin drop harness from the microswitch on the coin drop.

    2. Connect the C-5253 Coin Sense Harness to the microswitch on the the coin drop.

    componentPower

  • Disconnect the Coin Drop from the Machine Control Assembly.

    • Connect the C-5258 Coin Sense Harness to the harness connected to the Coin Drop.
    cci-readerinstall-kit
    KitID679
    KitDescCoin Drop: Factory Optical Sensor
    step
    componentCoin Sense

    cci-readerinstall-kit
    KitID696
    KitDescCoin Drop: Imonex w/EM Board

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-5382 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID704
    KitDescCoin Drop: Factory - Micro Switch

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6253 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID707
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6258 Coin Sense Harness to the harness connected to the Coin Drop.

    Cci readerinstall kit
    KitID723
    KitDescCoin Drop: Factory

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6382 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Connect the C-5254 Machine Start Harness to the P2 connector on the Machine Control Assembly.
    Cci readerinstall kit
    KitID634
    KitDescPulse - Optical Sensor
    step
    componentStart

    cci-readerinstall-kitstep
    KitID636
    KitDescPulse - Micro Switch

    1. Connect the C-5256 Machine Start Harness to the harness previously connected to the coin switch on the Coin Drop.

    ...

    componentReader

    Machine Configuration

    No special configuration required.

    ...