Panel | ||
---|---|---|
| ||
This document lists the components of the current model of the LaundryCard Version 2 Cabinet and its ancillary parts. |
Panel | ||
---|---|---|
| ||
|
Note |
---|
Version 2 Cabinet VariantsThe default parts listed in this Parts Manual may differ from parts within an existing X-Changer at a store location. This is dependent on a number of factors including, but not limited to, time of install, any repair or upgrades performed, or any other outlying cause or reason. |
Cabinet Front Door - Exterior | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
---|
1 | C-1400R2 | v2 Shell Cabinet Revision 2 | Includes pre-drilled holes for C-1008 (Ingenico EMV Reader). | |
2 | C-1417 | Silk Screened Acrylic Panel | ||
3 | C-1053B-V2 | Zuljana Touchscreen Monitor Bezel | Older Version 2 cabinets may utilize the following:
| |
4 | C-1051 | Zuljana Touchscreen Monitor | C-1051 replacementmonitor installation requires one of two kits depending on the monitor being replaced:
If using a C-1052 Elo monitor, kit number | |
5 | C-0103-B | LaundryCard Card Reader Version 3, Revision B. | ||
6 | C-1407 | ELP Fisheye Lens Box Camera | 180 degree fisheye lens. | |
7 | C-1025 | Card Dispenser | ||
8 | C-1250 | Medeco Lock Shell w/ Mounting Nut | ||
9 | C-1004 or C-1004-V2 | Bill Note Acceptor (BNA) | BNA may be one of the following models: C-1004 MEI Legacy BNA C-1004-V2 CPI MEI Talos BNA Note: A rare few X-Changers may utilize | |
10 | C-1009-LC | IDTech EMV Bezel (for MEI/CPI BNAs only) | Requires LaundryCard v9 software. Replaces C-1004B Credit Card Combo Bezel. Requires MEI/CPI BNA. Not usable with Pyramid BNA installed! | |
11 | C-1322 | PC Speaker | 4" diameter, 6oz. |
N/A | C-1405 | Cabinet Lock Crank | For fastening/unfastening locking bolt to door. |
N/A | C-1251 | Medeco Lock Core & Key | Only comes with 1 core and 1 matching key. | |
Cabinet Front Door - Door Panel Hardware | REFERENCE ID | PART NUMBER | DESCRIPTION |
---|
1 | C-1400-120 | Top Bracket | May be removed for replacing front acrylic panel. | |
2 | C-1042 | Kep Nut | Size: 8-32. | |
3 | C-1023 | Motorola/Zebra Barcode Scanner | Does not include mounting kit. | |
4 | C-1024C | Barcode Scanner Adapter Plate | Included in C-1024-SA. | |
5 | C-1024B | Barcode Scanner Swivel Bracket | Included in C-1024-SA. | |
6 | C-1024A | Barcode Scanner Mounting Bracket | Included in C-1024-SA. | |
7 | C-1025 | Card Dispenser | ||
8 | C-0993 | Card Dispenser Guide Tray | ||
9 | C-0995 | Card Dispenser Shelf | ||
10 | C-1250 | Medeco Lock Shell w/ Mounting Nut | ||
11 | C-1252 | Conical Compression Spring | Standard: 3/4 Lg, .98 Lg OD, .625" S | |
12 | C-1061 | Hex Socket Bolt | Bolt size: 1/2" X 1 3/8" hex key. Customer may need C-1061-N nut. | |
13 | C-1004 or C-1004-V2 or C-5821 | Bill Note Acceptor (BNA) | BNA may be one of the following models: C-1004 MEI Legacy BNA C-1004-V2 CPI MEI Talos BNA C-5821 Pyramid BNA | |
14 | C-1006-1000 | BNA 1000 Note Stacker | Stacker size may vary between 1,000 note stacker and 500 note stacker. | |
Cabinet Front Door - Door Panel Hardware (Continued) | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
---|
1 | C-1401 | Camera Mounting Bracket | Only provided when C-1407 is purchased with the Xchanger unit. Sold separately. | |
2 | C-1407 | Fisheye Lens Box Camera | Requires LaundryCard v9 software. If the cabinet unit was purchased without a camera, then C-1400-122 (Camera Cover) will be provided. If on LaundryCard v8 software, operators may purchase C-7710 (USB Web Camera). | |
3 | C-1051 | Zuljana Touchscreen Monitor | C-1051 replacementmonitor installation requires one of two kits depending on the monitor being replaced:
If using a C-1052 Elo monitor, kit number | |
4 | C-1053BR | Galvanized Bracket | ||
5 | C-1322 | Speaker w/ 4" Magnet Shield | ||
6 | C-0103-B | LaundryCard Card Reader Version 3, Revision B. | ||
7 | C-1320 | Audio Amplifier w/ Enclosure | ||
Cabinet Front Door - Door Panel Cabling | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
---|
1 | C-0634-R | Barcode Scanner Cable | Included with C-1023 (Motorola/Zebra Barcode Scanner). | |
2 | C-0630R1 | Card Dispenser Interface Cable Revision 1 | ||
3 | C-1330 | USB-A to USB-B Cable | Included with C-1008 (Ingenico iUC285 EMV Reader). Length: 6ft. | |
4 | (See Comments) | MEI/CPI BNA Interface Cable or Pyramid Serial-to-USB Interface Cable | C-1003 MEI/CPI BNA Interface Cable sold separately. Pyramid Serial-to-USB Interface Cable comes with Pyramid BNA. Not sold separately. | |
5 | C-0640 | BNA Power Cable | Included with C-1004 (BNA). | |
6 | C-0622 | Audio Amplifier Power Cable | Voltage rating: 12V. | |
7 | C-0174 | Cat 5 Network Cable | Length: 3ft. | |
8 | C-1321 | 3.5mm Stereo Cable | ||
9 | C-1052P | Monitor Power Supply Cable | ||
10 | VGA Cable | |||
11 | C-1330 | USB-A to USB-B Cable | ||
12 | N/A | USB Camera Cable | Included with C-1407 (Fisheye Lens Box Camera). | |
(Not pictured) | N/A | IDTech VP3300 EMV Bezel USB Cable | Included with C-1009-LC. May require front panel USB plugin if no USB space in rear. | |
Cabinet - Internal Hardware (Front) | REF | PART NUMBER | DESCRIPTION | COMMENTS |
---|
1 | C-1400R2 | v2 Shell Cabinet Revision 2 | Includes drill holes for C-1008 (Ingenico EMV Reader). | |
2 | C-1400-130 | PC Mounting Bracket | ||
3 | C-0600-XE3 | Dell XE3 Computer | Replaced C-0600-XE2 (Dell XE2 Computer). | |
4 | C-1400-131 | Component Shelf | ||
5 | C-1400-132 | Shelf Support Bracket | ||
6 | C-0560 | Rack Filler Panel | ||
7 | C-0629 | D-Link 16 Port Network Switch | ||
8 | C-1375 | Slotted Wall Duct | Size: 1.5" X 1.5" (W X D), 1' length. | |
8 | C-1376 | Slotted Duct Cover | Size: 1.5" cover. | |
9 | C-0525 | CCI v1 Control Head | Replaced with C-0526 (CCI v2 Control Head). For a v1 Control Head to v2 Control Head replacement, use kit number K-0526-C. | |
10 | C-0517 | Tripp-Lite Surge Protectors | ||
11 | C-1040 | Tripp-Lite UPS 500VA Battery Backup Rack Mount | Internal battery replacement part number is C-1040-RB. | |
(Not Pictured) | C-1009-LC | IDTech VP3300 EMV Bezel USB Cable | May require front panel USB plugin if no USB space in rear. | |
(Not pictured) | N/A | Serial-to-USB cable for Pyramid BNA | Included with C-5821; may require front panel USB plugin if no USB space in rear. Used only for Pyramid BNAs. | |
Cabinet - Internal Hardware (Rear) | REF | PART NUMBER | DESCRIPTION | COMMENTS |
---|
1 | C-1277 | 120mm Cooling Fan Finger Guard | ||
1 | C-1275 | 120mm Cooling Fan | ||
2 | C-0600-XE3 | Dell XE3 Computer | Replaced C-0600-XE2 (Dell XE2 Computer). | |
3 | C-0525 | CCI v1 Control Head | Replaced with C-0526 (CCI v2 Control Head). For a v1 Control Head to v2 Control Head replacement, use kit number K-0526-C. | |
4 | C-0517 | Tripp-Lite Surge Protectors | ||
5 | C-1040 | Tripp-Lite UPS 500VA Battery Backup Rack Mount | Internal battery replacement part number is C-1040-RB. | |
6 | C-1370 | Cable Duct | Size: 2" X 2" (W X D), 1' length. | |
C-1371 | Cable Duct Cover | Not pictured. Size: 2" cover. | ||
Cabinet - Internal - Rear | REF | PART NUMBER | DESCRIPTION | COMMENTS |
---|
1 | C-1061-N | Square Nut | Sold separately. | |
2 | C-1432 | Lock Nut Cap | Requires (2) C-1433 screws. | |
3 | C-1278 | 120mm Cooling Fan Kit | Includes fan guard and retainer. | |
Cabinet - Internal - Rear - Cabling | REF | PART NUMBER | DESCRIPTION | COMMENTS |
---|
|
| 1 | C-1035 | The DB9/RS232 Cable that plugs into the C-1003 BNA Interface Cable that plugs into the C-1004 (BNA) | Black label. | ||
2 | VGA Cable | Blue label. | ||||
3 | C-1330 | USB-A to USB-B Cable | Red label. Included with C-1407 (Fisheye Lens Box Camera). Connects the Dell PC to the Camera. Length: 6ft. | |||
4 | C-0634-R | Barcode Scanner Cable | Orange label. Included with C-1023 (Motorola/Zebra Barcode Scanner). | |||
5 | C-0174 | Cat 5 Network Cable | Purple label. Connects the Dell PC to the D-Link network switch. Length: 3ft. | |||
6 | C-1330 | USB-A to USB-B Cable | White label. Included with C-1040 (Tripp-Lite UPS). Connects the Dell PC to the Tripp-Lite UPS battery backup. Length: 6ft. | |||
7 | C-1330 | USB-A to USB-B Cable | Yellow label. Included with C-1052 (LCD Touchscreen Monitor). Connects the Dell PC to the touchscreen monitor. Length: 6ft. | |||
8 | C-1321 | 3.5mm Stereo Cable | Connects the Dell PC to the amplifier. Length: 6ft. | |||
(Optional) | C-1009-LC | IDTech VP3300 EMV Bezel USB Cable | May require front panel USB plugin if no USB space in rear. |
9 | N/A | PC Power Cable | Brown label. Included with C-0600-XE3 (Dell XE3 Computer). Connects the Dell PC to the un-switched surge protector. | |
10 | N/A | Control Head Power Cable | Included with C-0526 (CCI v2 Control Head). Connects the Control Head to the switched surge protector. | |
Cabinet - Internal - Rear - Tripp-Lite Cabling | REF | PART NUMBER | DESCRIPTION | COMMENTS |
---|
|
| 1 | N/A | Network Switch Power Cable | Included with C-0629 (D Link 16 Port Network Switch). Connects to the un-switched outlet (Top-surge protector). | ||
2 | N/A | Dell PC power cable connects Top Tripp-Lite unit (C-0517) | Included with C-0600-XE3 (Dell XE3 Computer). Connects to the un-switched outlet (Top-surge protector). | |||
3 | C-0640 | BNA Power Cable | Included with C-1004 (BNA). Connects to the switched outlet (Bottom-surge protector). | |||
4 | C-1276 | Fan Power Cable | Connects to the switched outlet (Bottom-surge protector). | |||
5 | C-1052P | Touchscreen Monitor Power Cable | Included with C-1052 (Touchscreen monitor). Connects to the switched outlet (Bottom-surge protector). | |||
6 | N/A | Control Head Power Cable | Included with C-0526 (CCI v2 Control Head). Connects to the switched outlet (Bottom-surge protector). | |||
7 | C-1330 | USB-A to USB-B Cable | Connects the Tripp-Lite UPS unit to the Dell PC. Length: 6ft. | |||
8 | C-0517 | Bottom Tripp-Lite Surge Protector | Cable from the bottom Tripp-Lite surge protector (C-0517) to the switched outlet of the Tripp-Lite UPS unit (C-1040). | |||
9 | C-0517 | Top Tripp-Lite Surge Protector | Cable from the top Tripp-Lite surge protector (C-0517) to an un-switched (battery) outlet of the Tripp-Lite UPS unit (C-1040). |
Related Documents