Page Comparison

1. Open washer door

2. Press and hold the 1 key until 'Cod' appears on the display.

3. Press 1,2,3,4,1,2,3,4

4. 'Pro' appears on the display, press the 2 key repetitively until 'nod' appears on the display

5. Press the 1 key repetitively until 'Id-0- appears on the display

6. Press the 2 key one time, 'Id-1' appears on the display

7. Press the 1 key one time

8. Press the Stop key

1. Enter the program menu:

   1. Swipe horizontally the upper left corner of the screen (Swipe at least 1/3 the way across the top of the screen for best results.).

   2. (If password is enabled) Enter the 4-digit numeric code (default: 1-2-3-4).

2. Enabling card reader communication:

   1. Enter into the system settings menu.

   2. Select the Gear Icon

   3. Navigate to Connectivity > Internal GirNet.

   4. Enable the Active option.

3. Changing the control from Pro to Vended mode

   1. Enter into the system settings menu.

   2. Select the Gear Icon, then navigate to General Settings > Control Type.

   3. Set the Control Type setting to Vended.

More information + videos showing steps above: /wiki/spaces/QD/pages/7114058