Overview
This document is intended to guide the user through installation utilizing the kit numbered according to the document title. A list of associated equipment models including control information and additional installation notes can be found below.
Install Header
Required Hardware
Card Reader
Part ID Description C-5001
Reader Ports
Additional Info
Unverified
ACA Dip Switches
ACA machines using a serial configuration require dip switch 3 on the Machine Control Assembly to be set to the 'ON' position. All other dip switches should remain in the 'OFF' position.
ACA Card Ready
ACA Card Ready machines using a pulse configuration require a retrofit to a Coin-Ready state. This may require obtaining an additional Coin Sense Harness from Alliance.