Table of Contents
Overview
This document is intended to guide the user through removal of the standard LaundryCard reader bezel and installation of a flat-mount bezel.
Required Hardware
Macro lookup error: excerpt "C-0103-B" was not found on page "_LC Reader Installation" (with ID 8224871) in space "CCIDOC".
If you're experiencing issues please see our Troubleshooting Guide.
Additional Hardware
| Part ID | Description |
|---|---|
| C-0968 |
The completion of this guide requires a flat mount bezel similar to the one listed above. Actual bezel may vary- consult appropriate kit information or contact Technical Support for individual part information.
Required Tools and Supplies (Not Included)
- Needle nose pliers
- Phillips head screw driver
Installation
Step 1 - Remove Existing Bezel
- Remove any existing label surrounding the card slot on the card reader, if necessary.
- Remove the four screws securing the plastic grey bezel to the LaundryCard reader.
- Two screws are located above the card slot and two are located below.
- Retain screws for flat mount bezel install.
- Gently remove the plastic bezel.
Step 2 - Attach the Flat Mount Bezel
- Place the LaundryCard reader assembly against the flat mount bezel and secure with four screws retained in step 1.
- Using needle nose pliers, gently bend the bracket holding the card reader screen until it lies flush against the upper slot in the flat mount bezel.
- Use caution as card reader circuitry and LCD screens are fragile.
- Once LaundryCard reader is satisfactorily secured and positioned, flat mount bezel may be mounted on appropriate machine facing using the materials provided in the associated kit.