Table of Contents

Equipment Models

This document is valid for the following equipment models...

• C-0106 FasCard Reader
  

Assumptions

This document assumes the installer has already configured a machine type via the FasCard administration website. For more information see 'Configuring Machine Types'

Tools Required

• No tools are required
  

Instructions 

Access 'Set Address' Mode with Power Up Method

FasCard readers can be addressed during their initial start up routine.

1. Connect power to FasCard reader
2. Immediately after the card reader version appears, press an hold all three buttons for a moment.
3. Manager menu appears
4. Navigate to Maintenance menu and press - key

Access 'Set Address' Mode with Machine Admin Card

FasCard readers can be addressed anytime with a FasCard with the appropriate privileges asigned.

1. Swipe FasCard with Machine Admin privleges
2. Menu Appears
3. Using arrows on keypad highlight 'Maintenance Menu' and press the - key

Setting Address

1. The 'Change Machine#' option should be highlighted, press the - key
2. Set Machine Number appears with 3 digits appearing the first one blinking
3. Use the up and down arrows to change the flashing digit to the desired value
4. Use the - key to confirm selection and move to the next digit
5. Once all three digits have the desired values, the newly set number will be displayed and 'Confirm' will be flashing
   1. Press - to confirm
   2. Press any other key to display 'Retry', press - to re-enter address

Video Tutorials