Skip to end of banner
Go to start of banner

_946

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 2 Current »

 I-M0157

Part #: C-0144

Desc 1: Screw

Desc 2: 8-32 x 2" - Flat

   Qty: 2

Part #: C-0930

Desc 1: Mounting Bracket

Desc 2: Unimac/ADC

   Qty: 1

Part #: C-6701

Desc 1: Adapter Plate

Desc 2: F1 to F2

   Qty: 1

Part #: C-0906

Desc 1: Spacer Plate

Desc 2: 5 1/2" x 4 3/8"

   Qty: 1

Part #: C-5801

Desc 1: F1 Reader Mounting Kit

Desc 2: Front

   Qty: 1

  1. Remove existing coin drop.

  2. Place C-6701 Adapter Plate over C-5702 Chase Nipple (Fig. 1).

  3. Place C-0906 Cover Plate over C-6701 Adapter Plate so that the outer set of holes align (Fig 2).

  4. Place C-5700 Mounting Bracket over C-6701 Adapter Plate so that the outer set of holes are not covered. Secure all parts together using the C-5703 Nut (Fig 3).

  5. Place the C-0930 Mounting Bracket behind the machine panel's coin drop opening, and the previously assembled bracket on the front side. Secure and tighten into place using the C-0144 screws (Fig 4).

  • No labels