_746

 I-M0035

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-0930

Desc 1: Mounting Bracket

Desc 2: Unimac/ADC

   Qty: 1

  1. Locate an appropriate location to cut a hole for the reader where the start harness can still reach the the control board.

  2. Cut a hole into the machine's panel using the C-0930 Mounting Bracket as a template (place on front of machine and mark opening/screw holes).

    template.png
  3. Place C-0930 Mounting Bracket behind the panel and secure reader to the otherside using (2) C-0141 Screws.