Skip to end of banner
Go to start of banner

_746

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

 I-M0035

Part #: C-0015

Desc 1: Label

Desc 2: Reader Cover Label

   Qty: 1

Part #: C-0141

Desc 1: Screw

Desc 2: 8-32 x 1-1/2" - Cap

   Qty: 2

Part #: C-0930

Desc 1: Mounting Bracket

Desc 2: Unimac/ADC

   Qty: 1

  1. Locate an appropriate location to cut a hole for the reader where the start harness can still reach the the control board.

  2. Cut a hole into the machine's panel using the C-0930 Mounting Bracket as a template (place on front of machine and mark opening/screw holes).

  3. Place C-0930 Mounting Bracket behind the panel and secure reader to the otherside using C-0141 screws.

  • No labels