_1147

Owned by David Bussman
Last updated: Nov 07, 2024
1 min read
 I-M0276

Part #: C-5033

Desc 1: Label

Desc 2: 4-5/8" x 3-1/2"

   Qty: 1

Part #: C-5710

Desc 1: Rubber Grommet

Desc 2: 3/4"

   Qty: 1

Part #: C-6802

Desc 1: FLEX RF Reader Mounting Kit

Desc 2:

   Qty: 1

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Place the C-5033 Label over the coin drop opening.

  4. Refer to FasCard F2/F3 Reader Installation Guide - Front Mount for further instructions.