3115 Reader Install Guide
Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
Equipment Details
Type: Tumble Dryer (Stack)
Manufacturer: Maytag
Make: Maytag
Model Length: 10
Associated Models
MLE26PDBYW
MLE26PRBYW
MLE26PRBYW2
MLE26PRKYW
MLE26PRYWW
MLE27PDBYW
MLE27PDBYW1
MLE27PDBYW2
MLG24PDAWW
MLG24PRAWW
MLG26PDBWW
MLG26PDBWW1
MLG26PRAWW
MLG26PRBWW
MLG26PRBWW1
MLG26PRBYW
MLG26PRKWW
MLG26PRKWW0
MLG27PDBWW
MLG27PDBWW1
MLG27PRAWW
MLG27PRBWW
MLG27PRBWW0
Recommended Tools and Supplies
Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure
Installation
CCI Software Configuration
Machine Control | Pulse | Serial |
---|---|---|
Gen2 | SingleVend (MLV+) / 24ms | Maytag Gen2 M6 Stacked Dryer |
Additional Resources
- How to Program Address on a FasCard Reader
- FasCard Admin Site - Equipment Setup
- FasCard Admin Site - Machine Setup
- FasCard Admin Site - Pricing & Features Schedule
- F1 Reader Mounting Guide
- FasCard F2/F3 Reader Installation Guide - Front Mount
- FasCard Installation Videos
- FasCard Kit Installations - Machine Configurations & Related Documents