3232 Reader Install Guide

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Washer
Manufacturer: Alliance
Make: [VARIES]
Model Length: Not Set

Branded as Dexter or Speed Queen

Associated Models

EX21816000T
EX21816200T
EX218162012T
EX325161002T
EX325161012T
EX325162000T
EX325162002T
EX325162012T
EX440161000N
EX440162000N
EX440162010N

Recommended Tools and Supplies

Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure

Installation

Connect Machine Interface Harness

I-T0040

Part #: C-5256

Desc 1: Machine Start Harns (pulse)

Desc 2: 20" - Male taps, Rq. Female

Qty: 1

Connect the C-5256 Machine Start Harness to the harness previously connected to the micro switch on the coin drop/slide.

CCI Software Configuration

Machine Control	Pulse	Serial
CAM Timer	SingleVend (Relay) / 500ms	NOT SUPPORTED

CCI Documentation