3683 Reader Install Guide
- Chris Kite
- CCI Integration User
Warning!
This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.
It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.
Overview
Equipment Details
Type: Washer Extractor
Manufacturer: Continental
Make: Continental
Model Length: Not Set
No power kit required. Start harness provides power for readers.
F2/F3 Coin and Card Installs: Customer must note if machine is equipped with a single or dual coin drops.
Associated Models
GS023P2W011021
GS023P2W011111
GS023P2W0111110
GS023P2W0111111
GS023X1W001011
GS023X1W011011
GS023X1W0110121
GS023X1W011021
GS023X1W011111
GS023X1W021011
GS023X1W11011
GS023X1W111011
GS023X1W1W011121
GS023X1W211011
GS030P2W111011
GS030X1W111011
GS030X1W121011
GS030X1W211011
GS045P1W111021
GS045P2W111011
GS045P2W111021
GS045X1W11021
GS045X1W111011
GS045X1W111021
GS045X1W121011
GS060P2W11011
GS060P2W111011
GS060P2W111021
GS060P2W211011
GS060X1W111011
GS060X1W111021
GS060X1W121011
GS080P2W111011
GS080P2W111021
GS080P2W211011
GS080P2W211021
GS080X1W111011
GS080X1W111021
GS080X1W200021
GS080X1W211011
GS080X1W211021
GS080X1W221011
HS701330H
HS701845H
Recommended Tools and Supplies
Drill
1 1/8" Tungsten Carbide Tipped Hole Cutter
Cutting Oil
9/64" Drill Bit
Center Punch
Hammer
Fine Point Permanent Marker
Pliers
Tape Measure