FasCard Touch Kiosk Parts Manual
Purpose
This document lists the components of the current model of the FasCard Touch Kiosk and FlexRF Touch Kiosk, and their ancillary parts.
On This Page
- 1 Purpose
- 2 Exterior - Front (C-5610R1 TK2 V2; C-5610R2 TK2 V3)
- 3 Exterior - Front (C-5610RF FLEX RF Touch Kiosk)
- 4 Interior Hardware - Main Components
- 5 Interior Hardware - Lock Component
- 6 Interior Hardware - Drawer Interior with Asahi Seiko Card Dispenser/Reader
- 7 Interior Hardware - MingteTech Card Dispenser/Reader
- 8 Interior Hardware - MingteTech RF Card Dispenser
- 9 Interior Hardware - CCI Harnesses for MingteTech Card Dispensers
- 10 Interior Hardware - Power
- 11 Interior Hardware - Motherboard
- 12 Interior Hardware - Cables
- 13 Related Articles
Exterior - Front (C-5610R1 TK2 V2; C-5610R2 TK2 V3) | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
 | 1 | C-5620 | Shell Cabinet |
|
2 | C-5632-R1 | CCI Domed Logo Revision 1 |
| |
3 | C-1250 | Medeco Locking Shell w/ Mounting Nut |
| |
4 | C-5633-R1 | FasCard Domed Label Revision 1 |
| |
5 | C-5678 | LCD Display | Monitor size: 10.4". | |
6 | C-5621 | Kiosk Monitor Bezel |
| |
7 | C-5630 | Touchscreen Kiosk Gasket | Goes under the bezel. | |
8 | C-5631-R1 | Insert/Take Card Label Revision 1 | No text label is part number C-5631-R3. | |
9 | C-5650R1 C-5651 | Card Dispenser/Reader | Use kit number K-5651-TK1 to swap a legacy C-5650R1 to a C-5651 in a TK1. Use kit number K-5651-TK2 to swap a legacy C-5650R1 to a C-5651 in a TK2. | |
10 | C-5660-V2 | Bill Note Acceptor (BNA) | May include a C-1009 EMV Bezel. | |
(10A) | 10A | C-1009 | EMV Bezel | Installed in place of the default BNA bezel. Used for EMV-ready FasCard/FLEX locations. |
| 12 | C-1405 | Lock Crank | Cabinet door handle size: 3/8" hex bolt. |
| 13 | C-1251 | Medeco Lock Core & Key | Only comes with 1 core and 1 matching key. |
Exterior - Front (C-5610RF FLEX RF Touch Kiosk) | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-5644 | FLEX RF Touch Kiosk header label |
|
2 | C-5643 | FLEX RF Touch Kiosk “Get New Card Here” label |
| |
3 | C-5652 | MingteTech MT166+RF Card Dispenser | Dispenses NFC Loyalty Cards used in FLEX RF systems, including C-5906 Generic FLEX RF RFID Cards. | |
4 | C-1009 | EMV Bezel | Required for FLEX RF Touch Kiosks. | |
Interior Hardware - Main Components | REFERENCE ID | PART NUMBER | DESCRIPTION | COMMENTS |
|---|---|---|---|---|
| 1 | C-5665R1 | Touch Kiosk Power Control Board Revision 1 | Replaced C-5665 (Touch Kiosk Power Control Board). Uses a 2-pin Green Terminal Block Connector port in place of two soldered-on wires for Card Dispenser power. Compatible with both Asahi Seiko and MingteTech card dispenser/reader models. |
2 | C-5698-V2 | WiFi Antenna |
| |
3 | C-5671-ASSEM | Version 2 Touch Kiosk CPU Board Assembly | CPU Board Only: C-5671. V1 Touch Kiosk (TK1) requires K-5671. | |
4 | C-5650R1 C-5651 | Card Dispenser/Reader | C-5650R1-TAB for plastic tabs. C-5650R1 succeeded by C-5651 MingteTech MT166-C Card Dispenser. C-5651 dispensers require a C-0996 riser shelf. Use kit number K-5651-TK1 to swap a legacy C-5650R1 to a C-5651 in a TK1. Use kit number K-5651-TK2 to swap a legacy C-5650R1 to a C-5651 in a TK2. | |
| 5 | C-5660-V2 | CPI MEI Talos Bill Note Acceptor (BNA) | Succeeds the legacy C-5660 MEI AE-2612-U5E BNA (pictured left) in newer Touch Kiosk models. |
6 | C-1006-500 | BNA 500 Note Stacker | Compatible with C-1006-1000, for 1000 note capacity. | |
Interior Hardware - Lock Component | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-1250 | Medeco Lock Shell w/ Mounting Nut | |
2 | C-1252 | Conical Compression Spring | Standard: 3/4 Lg, .98 Lg OD, .625" S | |
3 | C-1061 | Hex Socket Bolt | Bolt size: 1/2" X 1 3/8" hex key. | |
Interior Hardware - Drawer Interior with Asahi Seiko Card Dispenser/Reader | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-5650R1 | Asahi Seiko Card Dispenser/Reader, Revision 1 | C-5650R1-TAB for plastic tabs. C-5650R1 succeeded by C-5651 MingteTech MT166-C Card Dispenser. C-5651 dispensers require a C-0996 riser shelf. Use kit number K-5651-TK1 to swap a legacy C-5650R1 to a C-5651 in a TK1. Use kit number K-5651-TK2 to swap a legacy C-5650R1 to a C-5651 in a TK2. |
2 | C-5650-CASS | Card Cassette for Card Dispenser/Reader | Included with C-5650R1. | |
3 | C-5640 | Drawer Slides | Two per package. | |
Interior Hardware - MingteTech Card Dispenser/Reader | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-5651 | MingteTech MT166-CC Card Dispenser/Reader | Successor to C-5650R1. Use kit number K-5651-TK1 to swap a legacy C-5650R1 to a C-5651 in a TK1. Use kit number K-5651-TK2 to swap a legacy C-5650R1 to a C-5651 in a TK2. Backwards compatible with TK1 updatable to firmware v102.03.19.24 or newer. Requires C-0996 TK Dispenser Riser Shelf for mounting. |
2 | C-5651-CABLE | Serial Interface Harness for MT166-CC Card Dispenser/Reader | Subassembly component for C-5666R3. Available separately. Also used with C-5652. | |
3 | C-5651-POWER | Power harness for MT166-CC Card Dispenser/Reader | Subassembly component for C-5666R3. Available separately. Also used with C-5652. Can only be used with C-5665R1 or newer TK Power Controllers. | |
Interior Hardware - MingteTech RF Card Dispenser | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-5652 | MingteTech MT166+RF Card Dispenser/Reader | Used in FLEX RF Touch Kiosks only. |
2 | C-5651-CABLE | Serial Interface Harness for MT166+RF Card Dispenser/Reader | Subassembly component for C-5666R3. Available separately. Also used with C-5651. | |
3 | C-5651-POWER | Power harness for MT166+RF Card Dispenser/Reader | Subassembly component for C-5666R3. Available separately. Also used with C-5651. Can only be used with 2nd-generation or newer TK Power Controllers. | |
4 | C-5654 | Mounting Bracket for MT166+RF Card Dispenser/Reader | Used in FLEX RF Touch Kiosks only. | |
Interior Hardware - CCI Harnesses for MingteTech Card Dispensers | REF | PART NUMBER | DESCRIPTION | COMMENTS |
(1) | 1 | C-5651-CABLE | Serial Interface Harness for MT166 (CC and RF) Card Dispenser/Reader | Subassembly component for C-5666R3. Available separately. Used with C-5651 and C-5652. |
(2) | 2 | C-5651-POWER | Power harness for MT166 (CC and RF) Card Dispenser/Reader | Subassembly component for C-5666R3. Available separately. Used with C-5651 and C-5652. Can only be used with 2nd-generation or newer TK Power Controllers. |
Interior Hardware - Power | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-5668 | AC Power Cord | Length: 12ft. |
| 2 | C-5669 | Power Entry Module | |
3 | C-5667 | 24VDC Power Supply Unit (PSU) | ||
Interior Hardware - Motherboard | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-1044N | Nut | M3 kep nut. |
2 | C-5676 | Memory Module | Replaced C-5675 (Memory Module). | |
3 | C-5696 | Mini PCIe Bracket | Located on the underside of the circuit board. | |
| 4 | C-5695 | 802.11 Mini PCIe WiFi Adapter | Located on the underside of the circuit board. |
5 | C-5673 | 32GB Mini SATA Storage Card | Located on the underside of the circuit board. V1 Touch Kiosks use C-5672 (32GB SD Storage Card). | |
Interior Hardware - Cables | REF | PART NUMBER | DESCRIPTION | COMMENTS |
| 1 | C-5697 | RF WiFi Antenna Cable | Length: 23cm. |
2 | C-5679R1 | LVDS Cable Revision 1 | 20 Pin connector. Length: 50cm. | |
3 | C-5680 | LED Cable | 5-pin connector. Length: 50cm. | |
4 | C-5682 | USB-A to USB-B Cable | Length: 1ft. | |
5 | C-1003 | BNA Interface Cable | Sold separately. | |
| 6 | C-5666R2 | Version 2 Touch Kiosk Power Harness Revision 2 | Used in TK2 Touch Kiosks with the C-5650R1 Asahi Seiko Card Dispenser/Reader Contains all of the above-listed Interior Hardware cables. V1 Touch Kiosks use C-5666R1 (Touch Kiosk Power Harness Revision 1). |