Maytag Gen1 Configuration - LaundryCard
Overview
Use this guide when configuring Maytag machines in FasCard
On this page
Assumptions
This document assumes the installer is familiar with programming Maytag washers. This procedure is required to allow the CCI card reader to start the washer in Gen1 mode.
Configuration
Maytag MFR/MFS/MXR/MXS Washers
NOTE: Cycle Pricing and Deluxe/Ultimate pricing are not supported.
Single Price
Setting | Value |
|---|---|
Value of Coin 1 | 0.25 |
Regular Cycle Price | 2.00 |
Price Display | Hidden |
Coin/Debit | Coin.Card |
Clear Escrow | Yes |
Special Pricing... | Off |
Enhanced Pricing... | None |
Super Cycle
Use above settings plus the following:
Setting | Value |
|---|---|
Enhanced Pricing | Upgrade |
Super Cycle Display | Yes |
Super Cycle Price | 0.25 |
Deluxe Cycle Display | No |
Ultimate Cycle Display | No |
Maytag MHN/MAH/MAT Washers
Single Price
Code | Code Description | Value |
|---|---|---|
6 | Regular Cycle Price | 08 (8 coins) |
b | Value of Coin 1 | 05 (5 nickels - $0.25) |
F | Enhanced Pricing Option | 00 (Off) |
J | Coin Option | _d (Coins disabled) |
L | Price Suppression Option | PS (On) |
n | Clear Escrow Option | CE (On) |
Super Cycle
Use above settings plus the following:
Code | Code Description | Value |
|---|---|---|
F | Enhanced Pricing Option | Su (Super Cycle enabled) |
H | Super Cycle Upgrade Price | 01 (1 coin) |
Maytag MVW Top-Load Washers
NOTE: Only supports single price for all cycles. Modifier pricing is not supported.
Code | Code Description | Value |
|---|---|---|
6 NORMAL | Normal Vend Price | 08 (8 coins) |
6 DELICATES | Delicate Vend Price | 08 (8 coins) |
6 POWERWASH | Powerwash Vend Price | 08 (8 coins) |
2 | Special Pricing Option | 00 (Off) |
b | Value of Coin 1 | 05 (5 nickels - $0.25) |
J | Coin/Debit Option | _d (Debit) |
L | Price Suppression Option | PS (On) |
n | Clear Escrow Option | CE (On) |