3705 Reader Install Guide

Owned by David Bussman
Oct 03, 2024

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Washer Extractor
Manufacturer: Wascomat
Make: Wascomat
Model Length: 6 to 8

Associated Models

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Install Mounting Hardware

No MOUNTING kits exist for this equipment.

Connect Power

No POWER kits exist for this equipment.

Connect Coin Sense Harness

No COIN SENSE kits exist for this equipment.

Connect Machine Interface Harness

No START kits exist for this equipment.

CCI Software Configuration

Machine ControlPulseSerial

Additional Resources