Alliance MDC II / Quantum Gold / Quantum Gold Pro Small Dryers
Alliance MDC II Single Dryer Small Dryers are available exclusively from Huebsch.
Alliance Quantum Gold / Quantum Gold Pro Small Dryers are available exclusively from Speed Queen.
Reference Images
Quantum Gold Dryer | Quantum Gold Control | Quantum Gold Pro Dryers | Quantum Gold Pro Control | MDC II Dryers | MDC II Dryer Control |
---|---|---|---|---|---|
|
|
Model Numbers
Regarding Model Numbers
Below are some base examples of starting characters of model numbers relevant to this equipment type. For a more detailed determination, the full model number of the machine is required.
Quantum Gold Examples:
- SDELCFG
- SDELYFG
- SDGLCFG
- SDGLYFG
Quantum Gold Pro Examples:
- SDENCAG
- SDGNCAG
- SDENYAG
- SDGNYAG
MDC II Examples:
- HDEBCAG
- HDGBCAG
Special Notes
- Enabling 'Card' mode may be done in one of three ways, depending on the series:
- A special jumper required to be plugged in to the machine control board in order to tell the control to operate in 'Card' mode. This jumper is provided by CCI part number C-0110-CP.
- This is more commonly found with older generation / classic Huebsch and Speed Queen equipment.
- This is more commonly found with older generation / classic Huebsch and Speed Queen equipment.
- The machine control board will have a dipswitch panel. To enable 'Card' mode, dipswitch 3 would have to be turned ON. Leave all other dipswitches in their original positions.
- This is more commonly found with some older and current generation Huebsch and Speed Queen equipment.
- This is not to be confused for the communication board, which may also have a dipswitch panel.
- No dipswitch panel or jumper: enabling card mode must be done at the machine programming level by setting the SErPAY option to "CArd" and CArdEn to "On".
- This is more common with the latest generation Huebsch and Speed Queen equipment.
- A special jumper required to be plugged in to the machine control board in order to tell the control to operate in 'Card' mode. This jumper is provided by CCI part number C-0110-CP.
Functionality
The following list describes the functionality that a CCI FasCard reader has with Alliance controls:
- Topoff Pricing
- The Quantum Gold Tumbler control supports two pricing options:
- Cold Start - Price to start dryer not running.
- Topoff - Price to add time to dryer in use.
- The Quantum Gold Tumbler control supports two pricing options:
- Cycle Configuration
- The ability to configure the following options:
- General Settings
- Enable or Disable
- Topoff
- Display Celsius
- Show Seconds
- Enable or Disable
- Audio Signals
- Enable or Disable
- Key Press*
- End of Cycle*
- Coin Drop/Card Beep*
- Remove Card Beep*
- Start Pad Beep*
- Enable or Disable
- Cycle Times
- Topoff Minutes (0-99)
- Topoff Seconds (0-59)
- Heat (or 'Standard' for MDC II) Cycle Minutes (0-99)
- Heat (or 'Standard' for MDC II) Cycle Settings (0-59)
- No Heat Cycle Minutes* (0-99)
- No Heat Cycle Seconds* (0-59)
- Cooldown
- High Cooldown Minutes (1-15)
- Medium Cooldown Minutes (1-15)
- Low Cooldown Minutes (1-15)
- Delicate Cooldown Minutes (1-15)
- Standard Cooldown Minutes** (1-15)
- Temperatures
- High - Set in degrees F 100-160
- Medium - Set in degrees F 100-160
- Low - Set in degrees F 100-160
- Delicate - Set in degrees F 100-160
- Default Cycle
- High
- Medium
- Low
- Delicates
- No Heat*
- General Settings
- The ability to configure the following options:
*Not present in MDC II Controls.
** Not present in Quantum Gold / Quantum Gold Pro controls.
Screenshots
Cycle Configuration Interface - Equipment Setup (Quantum Gold / Quantum Gold Pro) | |||
---|---|---|---|
Cycle Configuration Interface - Equipment Setup (MDC II) | |||
Pricing Interface - Pricing/Schedule Setup | |||
Additional Resources
Quantum Gold Small Dryer Brochure
Quantum Gold Pro Small Dryer Spec Sheet
MDC II Single Dryer Spec Sheet
FasCard Reader Installation Guide