Alliance MDC II / Quantum Gold Front Load Washers
Alliance MDC II Front Load Washers are available exclusively from Huebsch.
Alliance Quantum Gold Front Load Washers are available exclusively from Speed Queen.
Reference Images
| Quantum Gold (Classic) | Quantum Gold Control (Classic) | Quantum Gold Pro Washers | Quantum Gold Pro Control | MDC II Washers | MDC II Control |
|---|---|---|---|---|---|
 |
|
|
|
|
|
Model Numbers
Regarding Model Numbers
Below are some base examples of starting characters of model numbers relevant to this equipment type. For a more detailed determination, the full model number of the machine is required.
- SFNBC
- SFNNC
- SFNNY
- SFNWC
- STENC
- HTEBC
Special Notes
- Enabling 'Card' mode may be done in one of three ways, depending on the series:
- A special jumper required to be plugged in to the machine control board in order to tell the control to operate in 'Card' mode. This jumper is provided by CCI part number C-0110-CP.
- This is more commonly found with older generation / classic Huebsch and Speed Queen equipment.
- This is more commonly found with older generation / classic Huebsch and Speed Queen equipment.
- The machine control board will have a dipswitch panel. To enable 'Card' mode, dipswitch 3 would have to be turned ON. Leave all other dipswitches in their original positions.
- This is more commonly found with some older and current generation Huebsch and Speed Queen equipment.
- This is not to be confused for the communication board, which may also have a dipswitch panel.
- No dipswitch panel or jumper: enabling card mode must be done at the machine programming level by setting the SErPAY option to "CArd" and CArdEn to "On".
- This is more common with the latest generation Huebsch and Speed Queen equipment.
- A special jumper required to be plugged in to the machine control board in order to tell the control to operate in 'Card' mode. This jumper is provided by CCI part number C-0110-CP.
Functionality
The following list describes the functionality that a CCI FasCard reader has with Alliance controls. The below tables are, then, sorted based on the differences between generations of machine types of this same control scheme.
Cycle-Based Pricing | ||
|---|---|---|
| A1/T1 Controls | A4 Controls | T4 Controls |
|
|
|
Modifier Addon Pricing | ||
| N/A |
|
|
Cycle Configuration*
- The ability to turn on or off the following options:
- Medium Soil / Deluxe Modifier Options.
- Prewash
- Extra Rinse
- Additional Wash Time
- Additional Rinse Time
- Warm Final Rinse
- Heavy Soil / Ultra Modifier Options.
- Prewash
- Extra Rinse
- Additional Wash Time
- Additional Rinse Time
- Warm Final Rinse
The ability to set the Default Cycle/Temp and Default Cycle Modifier:
A1/T1 Controls A4 Controls T4 Controls - Normal Hot
- Normal Warm
- Normal Cold
- Perm Press Warm
- Delicate Cold
- Normal Hot
- Normal Warm
- Normal Cold
- Perm Press Hot
- Perm Press Warm
- Perm Press Cold
- Delicate Hot
- Delicate Warm
- Delicate Cold
- Normal/Hot
- Normal/Warm
- Normal/Cold
- Synthetic/Hot
- Synthetic/Warm
- Synthetic/Cold
- Delicate/Hot
- Delicate/Warm
- Delicate/Cold
N/A - Medium Soil
- Heavy Soil
- Deluxe
- Ultra
- Medium Soil / Deluxe Modifier Options.
- The ability to turn on or off the following options:
- The ability to turn on or off the Audio Signal* for:
- Key Press
- End of Cycle
- Coin Drop/Card Inserted
- Remove Card Beep
- Start Pad Beep
*A1/T1 Controls only allow:
- The ability to enable/disable Audio overall
- The ability to select Default Cycle/Temp.
Screenshots:
Cycle Configuration Interface - Equipment Setup | ||||
|---|---|---|---|---|
A1/T1 Controls | ||||
| ||||
A4 Controls
| ||||
T4 Controls
| ||||
Pricing Interface - Pricing/Schedule Setup | ||||
A1/T1 Controls | ||||
| ||||
A4 Controls
| ||||
T4 Controls
|
Additional Resources
Quantum Gold (Classic) Brochure