Table of Contents

Overview

Alliance MDC II Front Load Washers are available exclusively from Huebsch.

Alliance Quantum Gold Front Load Washers are available exclusively from Speed Queen.

Reference Images

Quantum Gold (Classic)	Quantum Gold Control (Classic)	Quantum Gold Pro Washers	Quantum Gold Pro Control	MDC II Washers	MDC II Control

Model Numbers

Regarding Model Numbers

Below are some base examples of starting characters of model numbers relevant to this equipment type. For a more detailed determination, the full model number of the machine is required.

SFNBC
SFNNC
SFNNY
SFNWC
STENC
HTEBC

Special Notes

Enabling 'Card' mode may be done in one of three ways, depending on the series:
- A special jumper required to be plugged in to the machine control board in order to tell the control to operate in 'Card' mode. This jumper is provided by CCI part number C-0110-CP.
  - This is more commonly found with older generation / classic Huebsch and Speed Queen equipment.
- The machine control board will have a dipswitch panel. To enable 'Card' mode, dipswitch 3 would have to be turned ON. Leave all other dipswitches in their original positions.
  - This is more commonly found with some older and current generation Huebsch and Speed Queen equipment.
  - This is not to be confused for the communication board, which may also have a dipswitch panel.
- No dipswitch panel or jumper: enabling card mode must be done at the machine programming level by setting the SErPAY option to "CArd" and CArdEn to "On".
  - This is more common with the latest generation Huebsch and Speed Queen equipment.

Functionality

The following list describes the functionality that a CCI FasCard reader has with Alliance controls. The below tables are, then, sorted based on the differences between generations of machine types of this same control scheme.

Cycle-Based Pricing
A1/T1 Controls	A4 Controls	T4 Controls
Normal Hot Normal Warm Normal Cold Perm Press Warm Delicate Cold	Normal Hot Normal Warm Normal Cold Perm Press Hot Perm Press Warm Perm Press Cold Delicate Hot Delicate Warm Delicate Cold	Normal/Hot Normal/Warm Normal/Cold Synthetic/Hot Synthetic/Warm Synthetic/Cold Delicate/Hot Delicate/Warm Delicate/Cold
Modifier Addon Pricing
N/A	Medium Soil Heavy Soil	Deluxe Ultra

Cycle Configuration*

The ability to turn on or off the following options:

Medium Soil / Deluxe Modifier Options.
- Prewash
- Extra Rinse
- Additional Wash Time
- Additional Rinse Time
- Warm Final Rinse
Heavy Soil / Ultra Modifier Options.
- Prewash
- Extra Rinse
- Additional Wash Time
- Additional Rinse Time
- Warm Final Rinse

The ability to set the Default Cycle/Temp and Default Cycle Modifier:

A1/T1 Controls	A4 Controls	T4 Controls
Normal Hot Normal Warm Normal Cold Perm Press Warm Delicate Cold	Normal Hot Normal Warm Normal Cold Perm Press Hot Perm Press Warm Perm Press Cold Delicate Hot Delicate Warm Delicate Cold	Normal/Hot Normal/Warm Normal/Cold Synthetic/Hot Synthetic/Warm Synthetic/Cold Delicate/Hot Delicate/Warm Delicate/Cold
N/A	Medium Soil Heavy Soil	Deluxe Ultra

The ability to turn on or off the Audio Signal* for:
- Key Press
- End of Cycle
- Coin Drop/Card Inserted
- Remove Card Beep
- Start Pad Beep

*A1/T1 Controls only allow:

The ability to enable/disable Audio overall
The ability to select Default Cycle/Temp.

Screenshots:

Cycle Configuration Interface - Equipment Setup

A1/T1 Controls

A4 Controls

T4 Controls

Pricing Interface - Pricing/Schedule Setup

A1/T1 Controls

A4 Controls

T4 Controls

Additional Resources

Quantum Gold (Classic) Brochure

Quantum Gold (Current) Brochure

FasCard Reader Installation Guide

Browser not supported