Skip to end of banner
Go to start of banner

Laundry Card Hardware Version Reference

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 5 Next »

This list contains the hardware that is commonly used in the Laundrycard X-Changers. Part numbers are included where applicable. If device has been discontinued, the most recent version can be used to replace. 

X-Changer Models - How to Identify

Version 1A

The first generation of X-Changer cabinet.

Defining Features:

  • The front and rear doors were inset rather then wrapped around the cabinet, removable and replaceable.
  • The graphics on the front of the cabinet were silk screened directly onto the steel.
  • Only 10 cabinets were built and shipped to customers of this version.

Version 1B

Defining Features:

  • The doors were permanently mounted and was not removable.
  • The doors were also changed so that the edges of the doors wrapped around the cabinet eliminating any pry points on the door.
  • The graphics were silk screened directly to the steel.
  • 20 cabinets were built and shipped to customers of this version.

Version 1C



Defining Features:

  • A 4 piece removable frame was created and mounted allowing the graphics to be applied to a clear acrylic panel.
  • The printed graphic panel could be changed and replaced at the store owners request. T
  • his version also allowed us to design a retrofit kit that would allow a LCD flat screen touch-screen to be used in replacement of the CRT monitor.

Version 2A

Defining features:

  • New smaller dimensions
  • Single lock on each access door
  • Flat panel monitor

Version 2B

Defining features:

  • New graphic acrylic
  • Component rack has been shifted right 1/2"
  • Pre-drilled holes for the EMV chip reader mount

Lite X-Changer

Defining Features:

  • Smaller than V2 X-Changer
  • Computer and monitor are all in one integrated
  • Door can be mounted on front or rear of unit

Computers - Only CCI Authorized Computers Can Be Used in CCI X-Changers

Part Number and DescriptionPart picture

Compatible LaundryCard Software Version

Discontinued?
C-0600-GX780 Dell Optiplex GX780 SFF Computer

Version 5

Version 6

Version 7 

Version 8

YES
C-0600-XE Dell Optiplex XE SFF Computer

Version 7 

Version 8

YES
C-0600-XE2 Dell Optiplex XE2 SFF Computer

Version 7 

Version 8

Version 9

YES

C-1021R1 10.4" Panel PC

Compatible with Lite X-Changers ONLY

CURRENT MODEL

Version 6

Version 7 

Version 8

Version 9 (TBA)

NO

C-0600-XE3 Dell Optiplex XE3 SFF Computer

CURRENT MODEL

Version 7 

Version 8

Version 9

NO


Touch Screen Monitors - Current Model ET1590L

Part Number and DescriptionPart picture

Compatible With

All X-Changer Cabinets?

Compatible LaundryCard Versions

Discontinued?
C-1054 ELO ET1545L Touchscreen with plastic bezel

YES

Version 5

Version 6

Version 7

YES
C-1057 ELO ET1547L Touchscreen with metal bezel


YES

Version 5

Version 6

Version 7

YES
C-1053 ELO ET1537L Touchscreen with no bezel

YES


Version 7 

Version 8

Version 9

YES

C-1052 ELO ET1590L Touchscreen with no bezel and black back.

CURRENT MODEL

YES


Version 7 

Version 8

Version 9

NO

Ethernet Power Controller / Power Switch (EPC)

Part Number and DescriptionPart picture

Compatible With

All X-Changer Cabinets?

Discontinued?
C-0515 Version 1 EPC

YESYES
C-0515 Version 2 EPC

YESYES
C-0515 Version 3 EPC

YESYES

C-0517 Tripplite RS-0615-R Surge Protection. Each X-Changer uses two of these units.

CURRENT MODEL

YESNO



Barcode Scanners

Part Number and DescriptionPart pictureDiscontinued?
C-1010 Welch Allyn ST3700 Barcode Scanner

YES
C-1024 Symbol MS4407 Barcode Scanner

YES
C-1023 Motorola DS457 Barcode Scanner

YES

C-1023 Zebra DS457 Barcode Scanner

CURRENT MODEL

NO

Card Readers - Local card reader mounted on the X-Changers

Part Number and DescriptionPart Picture

C-0100-VC-RR


Version 1 Cabinets ONLY!


C-0103-B

Must be programmed to 002 for all X-Changers.

Can be modified to work in a Version 1 Cabinet

Bill Acceptors

Part Number and DescriptionPart pictureDiscontinued?

C-1004 MEI 2811 Bill Acceptor

CURRENT MODEL

X-Changers Version 2 and Lite Compatible ONLY

NO

C-1002 MEI 2831 Bill Acceptor 

Down facing cash box Version 1 Cabinets ONLY!

YES
C-1005-RR MEI LE 3811 DL Bill Acceptor Version 1a Cabinets ONLY!

YES

Reader Control Unit (Control Head)

Part Number and DescriptionPart pictureCompatible CabinetDiscontinued?
C-0500R1 CCI Master Distribution Board (Requires Sealevel 8-Port Unit) Version 1 Cabinets Only!

Version 1 Cabinets ONLY

YES

C-0525 CCI Reader Control Head

CURRENT MODEL

Version 1

Version 2

Lite 

NO

Firewalls - Current Model Mikrotik hEX Lite

Part Number and DescriptionPart picture

Compatible LaundryCard Versions

Discontinued
C-0615 Cisco PIX  501 Firewall

Version 5, Version 6YES
C-4307 Astaro ASG-110 Firewall

Version 5, Version 6YES
D-Link DFL-210 Firewall

Version 5, Version 6, Version 7, Version 8YES
D-Link DFL-260 Firewall

Version 5, Version 6, Version 7, Version 8YES
C-4310 Mikrotik RB750GL

Version 5, Version 6, Version 7, Version 8YES

C-4311 Mikrotik hEX Lite

CURRENT MODEL

 Version 9NO

Credit Card Readers

Part Number and DescriptionPart pictureCompatible LaundryCard VersionsCompatible X-Changer Versions
C-4305 ID Tech WCR3227-512U credit card swipe reader

Version 6

Version 7

Version 8

Version 9

Version 1
C-1004B MEI AE2811-U10E Credit card combo bezel

Version 6

Version 7

Version 8

Version 9

Version 2

Lite

C-1008 Ingenico iUC285 EMV Combo credit card reader

Version 9

Version 1

Version 2

Lite


Internal Pictures Of X-Changers

X-Changer ModelDoorInternalRearFront
Version 1


Version 2



Lite





























































  • No labels