Versions Compared

Old Version 1

changes.mady.by.user Brett Norrell (Deactivated)

Saved on

compared with

New Version Current

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID771

  1. Remove existing coin box and coin drop.

  2. Install theC-5365 Bypass Harnessby removing the coin vault switch and connecting the spade terminal connections to C-5365 Bypass Harness.

  3. Bend the side tabs of theC-0936 Bracketoutward and install into the coin vault. The tabs should snap into place securing the bracket.

  4. Attach theC-0133Standoffsto theBracket.

  5. Apply the C-0033 Labelover the coin drop opening.

Connect Machine Interface Harness

Cci readerinstall kit
KitID599
KitDescPulse - EDC Control
  1. Connect the C-0109R1 Machine Start Harness to the Coin1 connection harness on the Machine Control Assembly.
Cci readerinstall kit
KitID951
KitDescPulse - Push Button Control
  1. Connect the C-0122 Spade Taps to the Black and White/Blue wires previously connected to the coin drop.
  2. Connect the C-0113 Machine Start Harness to the two C-0122 Spade Taps.
    1. Start harness wires can be connected to either of the coin drop wires. Pairing does not matter.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptcom.atlassian.confluence.content.render.xhtml.model.resource.identifiers.SpaceResourceIdentifier@7627108f
MultiExcerptNameLC Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through mounting bracket.
  2. Connect the free end of theMachine Start Harnessto port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the the Cat5 cables running to and from the adjacent machinesto ports labeled 3 (Line Connection Ports) as shown in the image above.
  4. Secure the LaundryCard reader to the bracket using included hardware.

Machine Configuration

TODO

Cci readerinstall footer