Versions Compared

Old Version 2

changes.mady.by.user Adam Arafat

Saved on

compared with

New Version Current

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID569
KitDescCoin and Card

  1. Place the C-5700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID815
KitDescCard Only - 30lb or Smaller Models

  1. Remove existing coin box and coin drop.

  2. Install the C-0928 Vault Mounting Bracket over the coin vault. Secure in place using C-1059 Kep Nuts.

    1. Use C-0141 screws to secure the reader to the C-0928 Vault Mounting Bracket after all harnesses are connected to the machine and reader.
    2. If supporting credit cards, apply the C-5027 Labelto the top of the reader, or a preferred location on the machine.
Cci readerinstall kit
KitID817
KitDescCard Only - 40lb or Larger Models

  1. Remove existing coin box and coin drop.

  2. Install the C-0934 Vault Mounting Bracket over the coin vault. Secure in place using C-1059 Kep Nuts.

    1. Use C-0141 screws to secure the reader to the C-0934 Vault Mounting Bracket after all harnesses are connected to the machine and reader.
    2. If supporting credit cards, apply the C-5027 Labelto the top of the reader, or a preferred location on the machine.

Connect Power

Cci readerinstall kit
KitID595
  1. Tap power as described in the document using theC-5101 Spade Taps provided.
  2. Connect theC-5210 Power Adapter Harness to the installed spade taps. Connect the opposite end to theC-5602 Power Converter.
  3. Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Cci readerinstall kit
KitID689
KitDescCoin Drop: Factory
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-5357 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Cci readerinstall kit
KitID814
KitDescSerial
  1. Connect theC-0126-MLV Machine Start Harness to theRS232 connection on the Machine Control Assembly.
  2. Connect the C-5359 Machine Start Harness to the Inputconnection on the Machine Control Assembly.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF1 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole as described in the F1: FasCard Reader Mounting Guide.
  2. Connect the free end of the C-5359 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of the C-0126-MLVMachine Start Harness to port 1 (Serial Connection Port) as shown in the image above.
  4. Connect the free end of the C-5357 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  5. Connect the free end of the C-5500 Power Extension Harness to port 4 (Power Harness Connection Port) as shown in the image above.
  6. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

Machine Configuration

TODO

Cci readerinstall footer