Versions Compared

Old Version 2

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 3

changes.mady.by.user CCI Integration User

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID852
KitDescCard Only

  1. Remove existing coin box and coin drop.

  2. Attach the C-5414 Standard Mounting Bracket to theC-6934 Mounting Bracket using the C-5420 Screws.

  3. Install the C-6934 Mounting Bracket into the coin vault opening. Secure in place using the C-1059 Kep Nuts.

Connect Power

Cci readerinstall kit
KitID595
  1. Tap power as described in the document using theC-5101 Spade Taps provided.
  2. Connect theC-5210 Power Adapter Harnessto the installed spade taps.
  3. Connect theC-5210 Power Adapter Harness to theC-5602 Power Converter.
  4. Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.
  5. Connect the opposite end of theC-5210 Power Adapter Harnessto theC-5602 Power Converter.
  6. Connect theC-5500 Power Extension Harness to the appropriate connector on theC-5602 Power Converter. The remaining cable end connects to the FasCard reader.

Connect Coin Sense Harness

Cci readerinstall kit
KitID716
KitDescCoin Drop: Factory
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

Connect Machine Interface Harness

Cci readerinstall kit
KitID833
KitDescSerial
  1. Connect theC-0126-MLVMachine Start Harness to theRS232 connector on the Machine Control Assembly.
  2. Connect theC-5359 Machine Start Harness to theInput connector on the Machine Control Assembly.

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

Item No.ComponentNotes
1Power Connection PortUtilizes the same power harnesses as the first generation FasCard reader.
2Pulse Connection PortConnection point for pulse machine start harnesses.
3Coin 1 Connection PortThis is the connection point for the harness input associated with Coin 1.
4Coin 2 Connection PortThis is the connection point for the harness input associated with Coin 2.
5Serial Connection PortThis is the connection point for serial machine start harnesses.
  1. Feed remaining harness ends through the mounting hole as described in theFasCard Mounting Guide.
  2. Connect the free end of theC-5359Machine Start Harnessto port 2 (Pulse Connection Port) as shown in the image above.
  3. Connect the free end of theC-0126-MLVMachine Start Harnessto port 5 (Serial Connection Port) as shown in the image above.
  4. Connect the free end of theC-6357Coin Sense Harnessto port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  5. Connect the free end of theC-5500Power Harness to port 1.
  6. Secure the FasCard reader to base as described in the FasCard Mounting Guide.

Machine Configuration

TODO

Cci readerinstall footer