Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

Cci readerinstall kit
KitID584
KitDescCoin and Card
  1. Place theC-6700-TEMPDrill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Cci readerinstall kit
KitID965
KitDescCard Only - Coin Model
  1. Remove existing coin box and coin drop.

  2. Attach theC-5414 F2 Mounting Bracketto the C-6923 Metercase Bracketusing(2)C-542010-32 x 1/4 Pan Screws.
  3. Run any card reader harnesses through the coin slot openings and the circular hole in theC-6923Metercase Bracket.
  4. Install the C-6923 Metercase Bracket into the front of the metercase and secure using the C-0923-ROD Metercase Mounting Rodfrom inside the metercase.

Cci readerinstall kit
KitID906
KitDescCard Only - Card/OPL Model
  1. Place theC-6700-TEMPDrill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to for further instructions.

Connect Power

Cci readerinstall kit
KitID595
KitDescTap 120/240v Power
  1. Use the C-5101 Spade Tapson the incoming power.
    1. Tap theL1wire.
    2. Tap theN/L2wire.
    3. Tap theGround wire.
  2. Take the C-5210 Power Adapter Harnessand connect the red tab connectors to the following wires:
    1. Connect thebluewire to theL1wire.
    2. Connect thebrownwire to theN/L2wire.
    3. Connect the green/yellow wire to theGroundwire.
  3. Connect the 3-pin connector from the C-5210 Power Adapter Harnessto the matching connection on the C-5602R1Power Converter.
  4. Connect the4-pinconnector from the C-5602R1 Power Converterto the matching connection on the C-5500Power Extension Harness.

Connect Coin Sense Harness

Cci readerinstall kit
KitID700
KitDescCoin Drop - Factory Optical
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect theC-6250 Coin Sense Harness to the harness connected to the Coin Drop.
Cci readerinstall kit
KitID1085
KitDescCoin Drop - DigiCoin
  1. Disconnect the Coin Drop from the Machine Control Assembly.
  2. Connect theC-6271 Coin Sense Harness to the connector on the back of the Coin Drop.

Connect Machine Interface Harness

Cci readerinstall kit
KitID642
KitDescPulse - Coin Drop (Coin Model)
  1. Connect theC-5272 Machine Start Harness to the machine coin harnessoriginally connected to the coin drop.
Cci readerinstall kit
KitID990
KitDescPulse - 12-pin Coin Harness (All Model)
  1. Connect theC-5273 Machine Start Harness to the 12-pin machine coin harnessoriginally connected to the coin drop.


Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole.
  2. Connect the free end of theC-5272 or C-5273 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.
  3. (Coin and Card Installations Only)Connect the free end of the C-6250 or C-6271 Coin Sense Harnessto port 3 (Coin Sense Harness Connection Port) as shown in the image above.
  4. Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.
Cci readerinstall footer