Versions Compared

Old Version 5

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 6

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Cci readerinstall header

Install Mounting Hardware

  • Place the C-5700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    • Refer to the F1 FasCard Mounting Guide for further instructions.
    cci-readerinstall-kit
    KitID616
    KitDescCoin and Card
    Cci readerinstall kit
    KitID841
    KitDescCoin and Card

    1. Place the C-6700-TEMP Drill Template on the desired mounting location.

    2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

    3. Refer to F2 Reader Mounting Guide for further instructions.

    ...

    KitID1024
    KitDescCard Only - Coin Models

    ...

    Remove existing W11034287 Fascia from machine console panel. Remove the coin drop and coin box from the machine.

    Insert C-6982 MayTag Adapter Bracket into the coin drop opening and align behind the coin drop bracket so the larger hole is towards the bottom. Then use (2) C-5420 10-32 x 1/4" Pan Screws to secure to the machine.

    Install the W11034310 Fascia over the console panel.

    Align the C-5414 F2 Standard Mounting Bracket with the holes in the C-6982 MayTag Adapter Bracket and attach together using (2) C-5436 10-32 x 1" Pan Screws.

    Cci readerinstall kit
    KitID1047
    KitDescCard Only - Card Model

    1. Remove any cover or card reader plate attached to the payment device mounting bracket.

    2. Place the C-5701 Mounting Plate behind the payment device mounting bracket and align the set of lower mounting points with that of the out set of threaded holes on the C-5701 Mounting Plate. Ensure the inner set of threaded holes are accessible through the central opening in the MayTag payment device bracket. Attach using (2) C-1060 8-32 x 3/8" Screws.

    3. Place the C-5700 Mounting Bracket over the front of the assembly so that the set of circular openings align with the threaded holes of the C-5701 Mounting Plate accessible through the central opening. Attach using the remaining (2) C-1060 8-32 x 3/8" Screws.

    Insert C-6982 MayTag Adapter Bracket into the payment device opening and align behind the bracket so the larger hole is towards the bottom. Then use (2) C-5420 10-32 x 1/4" Pan Screws to secure to the machine.

    Align the C-5414 F2 Standard Mounting Bracket with the holes in the C-6982 MayTag Adapter Bracket and attach together using (2) C-5436 10-32 x 1" Pan Screws.
    Cci readerinstall kit
    KitID1060
    KitDescCard Only - Coin Models
    step
    componentMounting

    Connect Power

    Cci readerinstall kit
    KitID595
    KitDescPower Supply - Tap Machine Power

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5210 Power Adapter Harness to the power distribution panel inside the machine.

      1. 120vac: Connect the blue wire to L1 and the brown wire to N.

      2. 240vac: Connect the blue wire to L1 and the brown wire to L2.

      3. Connect the green wire to ground.

    2. Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.

    3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    ...