Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.

Cci readerinstall kit
KitID965
KitDescCard Only - Coin Model

  1. Remove existing coin box and coin drop.

  2. Attach the C-5414 F2 Mounting Bracket to the C-6923 Metercase Bracket using (2) C-5420 10-32 x 1/4 Pan Screws.

  3. Run any card reader harnesses through the coin slot openings and the circular hole in the C-6923Metercase Bracket.

  4. Install the C-6923 Metercase Bracket into the front of the metercase and secure using the C-0923-ROD Metercase Mounting Rod from inside the metercase.

Cci readerinstall kit
KitID906
KitDescCard Only - Card/OPL Model

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to Touchscreen Reader Mounting Guide (F2 & F3) for further instructions.

Connect Power

Cci readerinstall kit
KitID595
KitDescTap 120/240v Power

  1. Use the C-5101 Spade Taps on the incoming power.

    1. Tap the L1 wire.

    2. Tap the N/L2 wire.

    3. Tap the Ground wire.

  2. Take the C-5210 Power Adapter Harness and connect the red tab connectors to the following wires:

    1. Connect the blue wire to the L1 wire.

    2. Connect the brown wire to the N/L2 wire.

    3. Connect the green/yellow wire to the Ground wire.

  3. Connect the 3-pin connector from the C-5210 Power Adapter Harness to the matching connection on the C-5602R1 Power Converter.

  4. Connect the 4-pin connector from the C-5602R1 Power Converter to the matching connection on the C-5500 Power Extension Harness.

Connect Coin Sense Harness

Cci readerinstall kit
KitID700
KitDescCoin Drop - Factory Optical

  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6250 Coin Sense Harness to the harness connected

to the Coin Drop.
Cci readerinstall kit
KitID1085
KitDescCoin Drop - DigiCoin
  • Disconnect the Coin Drop from the Machine Control Assembly.
    • Connect theC-6271 Coin Sense Harness

    1. to

    the connector on the back of

    1. the Coin Drop.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID642
    KitDescPulse - Coin Drop (Coin Model)

    1. Connect the C-5272 Machine Start Harness to the machine coin harness originally connected to the coin drop.

    Cci readerinstall kit
    KitID990
    KitDescPulse - 12-pin Coin Harness (All Model)

    1. Connect the C-5273 Machine Start Harness to the 12-pin machine coin harness originally connected to the coin drop.


    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    1. Feed remaining harness ends through the mounting hole.

    2. Connect the free end of the C-5272 or C-5273 Machine Start Harness to port 2 (Pulse Connection Port) as shown in the image above.

    3. (Coin and Card Installations Only)Connect the free end of the C-6250 or C-6271 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

    4. Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.

    Cci readerinstall footer