Versions Compared

Old Version 5

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 6

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Remove coin drops and coin boxes.

  • Remove vault service switch connections from the switch and bridge using the C-5365 Bypass Harness.

  • Take the C-0940 Vault Cover and bend the inner tabs outward.

  • Insert the C-0940 Vault Cover into the coin box opening. The previously bent tabs should catch the inner lip of the coin vault and secure the bracket in place.

  • Place the C-5700-TEMP Drill Template on the desired mounting location.

  • Verify included harnesses will reach desired location without encountering interference from internal machine components.

    1. Suggested mounting location: Coin drop opening.

    • Refer to FasCard Mounting Guide for further instructions.
    Cci readerinstall kit
    KitID905
    KitDescCard Only - Card Model

    1. Place the C-5700-TEMP Drill Template on the desired mounting location.

    2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

    3. Refer to FasCard Mounting Guide for further instructions.

    Cci readerinstall kit
    KitID910
    KitDescCard Only - Coin Drop

    Connect Power

    Cci readerinstall kit
    KitID595
    KitDescTap Machine Source Power

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5210 Power Adapter Harness to the power distribution panel inside the machine.

      1. 120vac: Connect the blue wire to L1 and the brown wire to N.

      2. 240vac: Connect the blue wire to L1 and the brown wire to L2.

      3. Connect the green wire to ground.

    2. Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.

    3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    ...