3619 Reader Install Guide

Owned by David Bussman
Last updated: Feb 07, 2024 by Chris Kite
1 min read

Warning!

This document assumes the installer has working knowledge of hand tools and of the target machine in question. Physical modification of machine may be required, including modification of machine panels and internal modification to accommodate cables or harnesses.

It is recommended that the instructions contained herein be performed by individuals who are qualified to perform these tasks. Card Concepts Inc. takes no responsibility for the accuracy of this document or for any damage that may occur to target machine.

Overview

Equipment Details

Type: Small Dryer (Stack)
Manufacturer: Alliance
Make: Speed Queen
Model Length: 8

Associated Models


BSE907WF
HSET17WF
SSE107WF
SSE907WF
SSE917WF
SSET07WF
SSG109WF
SSG119WF
SSG909WF
SSGT09WF
SSGT19WF
SSGY09WF
SSGY19WF

Recommended Tools and Supplies

  • Drill

  • 1 1/8" Tungsten Carbide Tipped Hole Cutter

  • Cutting Oil

  • 9/64" Drill Bit

  • Center Punch

  • Hammer

  • Fine Point Permanent Marker

  • Pliers

  • Tape Measure

Installation

Extras

No EXTRAS kits exist for this equipment.

CCI Software Configuration

Machine ControlPulseSerial
CAM Timer*NOT SUPPORTED**NOT SUPPORTED*
Coin Slide Hybrid (Pulse)SingleVend (Relay) / 500ms*NOT SUPPORTED*
EDCSingleVend (Relay) / 80ms*NOT SUPPORTED*
MDC (Vended)SingleVend (MLV+) / 80msAlliance MDC Small Dryer
NetMasterSingleVend (Relay) / 80ms*NOT SUPPORTED*

Additional Resources