| Remove coin slides and coin boxes.Remove vault service switch connections from the switch and bridge using the C-5365 Bypass Harness.Take theC-0940Vault Coverand bend the inner tabs outward.Insert the C-0940Vault Cover into the coin box opening. The previously bent tabs should catch the inner lip of the coin vault and secure the bracket in place.Place theC-5700-TEMPDrill Template on the desired mounting location. Verify included harnesses will reach desired location without encountering interference from internal machine components. Place the C-5035 Label over the coin slide opening.Refer to Remove coin drops and coin boxes. Remove vault service switch connections from the switch and bridge using the C-5365 Bypass Harness. Take the C-0940 Vault Cover and bend the inner tabs outward. Insert the C-0940 Vault Cover into the coin box opening. The previously bent tabs should catch the inner lip of the coin vault and secure the bracket in place. Place the C-5700-TEMP Drill Template on the desired mounting location. Verify included harnesses will reach desired location without encountering interference from internal machine components. Suggested mounting location: Coin drop opening.
Refer to
for further instructions. |