Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Install Mounting Hardware

...

KitID584
KitDescCoin and Card

...

Verify included harnesses will reach desired location without encountering interference from internal machine components.

...

KitID845
KitDescCard Only

...

Remove existing coin box and coin drop.

...

Connect Power

...

KitID663
KitDescTap Machine Power

...

Connect

...

Power

...

Connect Coin Sense Harness

Cci readerinstall kit
KitID923
KitDescCoin Drop - Factory Optical
  1. Disconnect the Coin Drop from the Machine Control Assembly.

  2. Connect the C-6332 Coin Sense Harness to the harness connected to the Coin Drop.

    1. Connect the Red connector to the Coin Acceptor connection, where the coin drop was previously connected, on the Machine Control Assembly.

Connect Machine Interface Harness

Cci readerinstall kit
KitID608
KitDescSerial
  1. Connect the C-0114-MLV Machine Start Harness to the middle X1 port on the serial communication board.
    CCIDOCCOM Boardsfalse

Connect and Mount Reader

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameF2 Reader
PageWithExcerpt_Reader Ports

  1. Feed remaining harness ends through the mounting hole.

  2. Connect the free end of the C-0114-MLV Machine Start Harness to port 5 (Serial Connection Port) as shown in the image above.

  3. (Coin and Card Installation Only) Connect the free end of the C-6332 Coin Sense Harness to port 3 (Coin Sense Harness Connection Port) as shown in the image above.

  4. Connect the free end of the C-5500 Power Extension Harness to port 1 (Power Harness Connection Port) as shown in the image above.

Machine Configuration

Multiexcerpt include
SpaceWithExcerptCCIDOC
MultiExcerptNameContinental ProfitPlus
PageWithExcerpt_Machine Configuration

...