Versions Compared

Old Version 3

changes.mady.by.user CCI Integration User

Saved on

compared with

New Version 4

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Cci readerinstall kit
KitID584
KitDescCoin and Card

  1. Place the C-6700-TEMP Drill Template on the desired mounting location.

  2. Verify included harnesses will reach desired location without encountering interference from internal machine components.

  3. Refer to FasCard Mounting Guide for further instructions

.
Cci readerinstall kit
KitID932
KitDescCard Only - 30lb & Smaller Models

  • Remove existing coin box and coin drop.

    • Attach the C-5414 Standard Mounting Bracket to theC-6922 Mounting Bracket using the (2) C-542010-32 x 1/4" Philips Screws.Install the C-6922 Mounting Bracket into the coin vault opening

    1. .

    Secure in place using the (2) C-1059 10-32 Keps Nuts.

    Cci readerinstall kit
    KitID869
    KitDescCard Only - 40lb+ Models

    1. Remove existing coin box and coin drop.

    2. Attach the C-5414 Standard Mounting Bracket to the C-6920R1 Mounting Bracket using the (2) C-5420 10-32 x 1/4" Philips Screws.

    3. Install the C-6920R1 Mounting Bracket into the coin vault opening. Secure in place using the (2) C-1059 10-32 Keps Nuts.

    Connect Power

    Cci readerinstall kit
    KitID595
    KitDescTap Source Machine Power

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5210 Power Adapter Harness to the power distribution panel inside the machine.

      1. 120vac: Connect the brown and blue wires to connector #2 closest to outside of machine and #4 on terminal side closest to circuit board.

      2. 240vac: Connect the brown and blue wires to connectors 3 and 5 on the terminal side closest to the circuit board.

      3. Secure the green wire beneath the ground screw.

    2. Connect the opposite end of the C-5210 Power Adapter Harness to the C-5602R1 Power Converter.

    3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602R1 Power Converter. The remaining cable end connects to the FasCard reader.

    Connect Coin Sense Harness

    Cci readerinstall kit
    KitID716
    KitDescFactory - Optical Coin Drop

    1. Disconnect the Coin Drop from the Machine Control Assembly.

    2. Connect the C-6357 Coin Sense Harness to the harness connected to the Coin Drop.

    Connect Machine Interface Harness

    Cci readerinstall kit
    KitID655
    KitDescPulse - Coin

    1. Connect the C-5353R1 Machine Start Harness to the Coin 1 connector on the Machine Control Assembly.

    Cci readerinstall kit
    KitID814
    KitDescSerial - Compass Control

    1. Connect the C-0126-MLV Machine Start Harness to the RS-232 port on the Machine Control Assembly.

    2. Connect the C-5359 Machine Start Harness to the Input 1 port on the Machine Control Assembly.

    Connect and Mount Reader

    Multiexcerpt include
    SpaceWithExcerptCCIDOC
    MultiExcerptNameF2 Reader
    PageWithExcerpt_Reader Ports

    ...

    Cci readerinstall footer