Versions Compared

Old Version 7

changes.mady.by.user Chris Kite

Saved on

compared with

New Version 8

changes.mady.by.user Chris Kite

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  • Attach the C-5414 F2 Mounting Bracket to the C-6602 Spacer Plate using the C-5702 Chase Nipple and the C-5703 Nut.

  • Feed the remaining harness ends through the open face of the Coin Vault.

  • Spread the C-6602 Vault Mount Bracket wings outward before insertion to lock bracket into place.

  • Feed remaining harness ends through the C-6602 Vault Mount Bracket.

  • Insert the C-6602 Vault Mount Bracket into the Coin Vault.

  • Feed the remaining harness ends through the combined C-5414 F2 Mounting Bracket.

    • Secure the combined C-5414 F2 Mounting Bracketto the C-6602 Vault Mount Bracket with the C-0144 Screws.
    Cci readerinstall kit
    KitID667
    KitDescCard Only - Small Coin Vault

    1. Install the C-5702 Chase Nipple into the C-5414 F2 Mounting Bracketusing the C-5703 Nut.

    2. Feed the remaining harness ends through the open face of the Coin Vault.

    3. Spread the C-6936 Vault Mount Bracket wings outward before insertion to lock bracket into place.

    4. Feed remaining harness ends through the C-6936 Vault Mount Bracket.

    5. Insert the C-6936 Vault Mount Bracket into the Coin Vault.

    6. Feed the remaining harness ends through the combined C-5414 F2 Mounting Bracket.

    7. Secure the combined C-5414 F2 Mounting Bracketto the C-6939 Vault Mount Bracket with the C-0144 Screws.

    Cci readerinstall kit
    KitID840
    KitDescCard Only - Large Coin Vault

    Connect Power

    Cci readerinstall kit
    KitID473

    1. Tap power as described in the Fascard Reader Install - Universal Concepts document by connecting the C-5338 Power Adapter Harness to the power distribution panel inside the machine or tapping as needed.

      1. 240vac- Connect Blue wire to the L1 tab, and the Brown wire to the L2 tab on the terminal block.

      2. Secure the green wire beneath the ground screw.

    2. Connect the opposite end of the C-5338 Power Adapter Harness to the C-5602 Power Converter.

    3. Connect the C-5500 Power Extension Harness to the appropriate connector on the C-5602 Power Converter. The remaining cable end connects to the FasCard reader.

    ...